Bartoline Superstik Grab Adhesive 300g
Safe and Easy To Use
Solvent Free
Dries White
May be overpa...Bartoline Superstik Grab Adhesive 300g
Safe and Easy To Use
Solvent Free
Dries White
May be overpainted
Suitable for Bricks, Wood, Stone etc.
This adhesive is a solvent-free grab adhesive that acts as a no nails solution. It is suitable for use on bricks, wood, and stone, and it dries white. It may also be overpainted. This pack contains 3 x 300g tubes.
3 Pcs Bartoline Superstik Grab Adhesive Solvent Free 300G No Nails Suitable For Bricks, Wood, Stone Etc. 5010789800062Free delivery in 1–3 days£9.95Visit shop →
B&QB&Q - Superstik Quick Grab Adhesive Solvent Free For Building Surfaces 300G
This guide is for anyone looking to use Bartoline Superstik Grab Adhesive 300g - White. It provides a safe and easy-to-use solution for bonding various materials without nails. A key benefit is its solvent-free formula, making it safer for use. However, it's essential to ensure proper surface preparation for optimal adhesion.
All features
Colour
White
Brand
Bartoline
Extended Product Information
FAQs
What materials can I use this adhesive on?
Bartoline Superstik Grab Adhesive is suitable for bricks, wood, and stone. Always test on a small area first.
Is this adhesive safe to use?
Yes, it is a solvent-free adhesive, making it safer than many alternatives.
Can I paint over the adhesive?
Yes, this adhesive dries white and can be overpainted.
How do I apply the adhesive?
You can apply the adhesive using a caulking gun or by squeezing it directly from the tube. Apply in a zig-zag pattern or small blobs.
How long does it take for the adhesive to dry?
Drying time depends on factors such as temperature and humidity. Refer to the product instructions for specific drying times.
How should I store the adhesive?
Store the adhesive in a cool, dry place and avoid extreme temperatures.
Troubleshooting
Adhesive not sticking properly.
Ensure surfaces are clean and dry. Apply a sufficient amount of adhesive. Allow for proper drying time.
Adhesive takes too long to dry.
Ensure adequate ventilation. Check the expiry date of the adhesive. Apply to a non-porous surface.
Pros and Cons
Pros
Safe to use due to its solvent-free nature.
Versatile, suitable for bonding a variety of materials.
Dries white, providing a clean base for overpainting.
Easy application, simplifying the bonding process.
Cons
May require surface preparation for optimal adhesion.
Adhesion strength depends on proper application and surface compatibility.
Not suitable for all materials; always test on a small area first.
Setup, Compatibility & Care
Surface Preparation: Ensure surfaces are clean, dry, and free from loose particles, dust, and grease. Porous surfaces may benefit from priming.
Application: Apply the adhesive using a caulking gun or by squeezing directly from the tube.
Bonding: Press the items firmly together. The initial grab will hold them in place.
Drying Time: Allow the adhesive to fully cure according to the product instructions before applying any stress.
Compatibility: Suitable for bricks, wood, and stone. Test on a small, inconspicuous area if unsure about material compatibility.
Care: Store in a cool, dry place. Avoid extreme temperatures. Clean up uncured adhesive with a damp cloth; cured adhesive may need to be removed mechanically.