Best current price£23.00from very.co.uk
Shopping.co.uk recommended and popular offers
very.co.uk£23.00Visit shop D-C-Fix Glossy White Self-Adhesive Vinyl Wrap Film - 67.5 X 500 Cm
Visit shop
B&Q£62.98Visit shop B&Q - Gloss White Self-Adhesive Furniture Wrap (L)15M (W)675mm
Visit shop4 offers from £23.00 - £62.98
View price history by clicking the chart icon.
This d-c-fix Glossy White Self-Adhesive Vinyl Wrap is designed for homeowners and DIY enthusiasts looking for a quick and affordable way to refresh surfaces. Its key benefit is the ease of application and a durable, cleanable finish for kitchen makeovers, furniture updates, and craft projects. A key caveat is its heat resistance limit of 70°C, meaning it's unsuitable for direct contact with hot pans or as a hob splashback. This vinyl offers a glossy white aesthetic, is easy to cut and apply with repositionable adhesive, and is water-resistant.
| Model Part Number | VUJU8 |
|---|---|
| Brand | d-c-fix |
This vinyl works best on smooth, clean, and dry surfaces like laminate, painted wood, metal, glass, and tiles. It is not recommended for heavily textured or dirty surfaces.
Clean with a soft cloth using mild household cleaning products. Avoid abrasive cleaners or scouring pads.
The vinyl is heat-resistant up to 70°C. It can withstand hot cups and plates but should not be used for direct contact with hot pans or as a splashback behind a hob.
Yes, the water-based adhesive is designed to be repositionable during application, allowing you to lift and reapply if needed.
You can remove the vinyl by gently heating it with a hairdryer. This softens the adhesive, making it easier to peel off without leaving significant residue.
While it is water-resistant, for full waterproofing in wet areas, it's recommended to add a sealant along the edges. It is not recommended for use directly behind a hob due to heat limitations.
This specific roll measures 67.5 cm in width and 500 cm in length.
Gently lift the vinyl back to the bubble and reapply, smoothing it out. For stubborn bubbles, you can prick them with a fine needle and carefully press the air out.
Ensure the surface is thoroughly cleaned and dried. If the surface is slightly porous, a light mist of water (for smooth surfaces) or warming the vinyl slightly with a hairdryer might help adherence. Check that the backing paper was fully removed.
Gently warm the vinyl with a hairdryer on a low setting. This makes it more pliable and stretchy, allowing it to conform to curved edges more easily. Work slowly and smooth as you go.
Try to gently lift the affected area and reapply, smoothing it out. If the crease is severe, a hairdryer can help relax the vinyl, allowing you to smooth it. For significant damage, a small section might need to be cut out and replaced.
Setup: Ensure the surface is clean, dry, and smooth before application. Peel back a small section of the backing paper, align the vinyl, and slowly stick it down, smoothing out any air bubbles with a soft cloth or squeegee as you go. For corners and edges, a hairdryer can gently warm the vinyl, making it more pliable and easier to shape. A light spray of water on very smooth surfaces like glass can help with initial positioning.
Compatibility: Adheres best to smooth, non-porous surfaces such as laminate, painted wood, metal, glass, and tile. Avoid applying to rough, textured, or freshly painted surfaces.
Care: To clean, use a soft cloth with mild household cleaning products. Avoid abrasive cleaners or scouring pads, as these can damage the glossy finish. Wipe spills promptly to maintain the surface quality.
