AEG Washer Dryer - D Rated

ProSteam technology allows you to refresh clothes using steam, which helps to reduce wrinkles and odors with minimal water usage (approx. 2L), ideal for garments that don't need a full wash.

The machine has a maximum wash capacity of 9kg and a maximum dry capacity of 5kg.

This is a freestanding washer dryer, offering flexibility in placement within your laundry space.

The drain pump filter is located behind a small access panel at the bottom front of the machine. Unplug the appliance, place a shallow tray underneath, and carefully unscrew the filter to clean it. Refer to the user manual for detailed instructions.

The 'D' rating is part of the EU energy labeling system. While it indicates a moderate level of energy efficiency compared to A-rated appliances, it still meets required standards for sale. For heavy usage, consider the long-term energy consumption.

The steam function is designed for refreshing lightly worn garments, reducing wrinkles, and removing light odors. It is not intended as a substitute for a full wash cycle for heavily soiled laundry.

The product dimensions are approximately 847mm (Height) x 597mm (Width) x 599mm (Depth). Note that the depth excludes knobs and the door.

Check if the power cord is plugged in securely. Ensure the door is fully closed. Verify that the water tap is open. Check your home's circuit breaker or fuse box.

Ensure the drain hose is not kinked or blocked. Check and clean the drain pump filter for debris. Verify the drain hose outlet height is within the recommended range.

Confirm transit bolts have been removed. Ensure the appliance is level on the floor. Check that the load is balanced within the drum.

Consult the user manual for the specific error code displayed and follow the recommended troubleshooting steps for that code.

Ensure you are using the correct type and amount of detergent. Do not overload the drum. Select the appropriate wash program for the fabric type.

Check if the spin speed was set too low or if a 'no spin' option was accidentally selected. Ensure the load size does not exceed the recommended capacity for drying.