Setup, Compatibility & Care
To set up the pump, ensure you are using a clean 1 1/4" hose connected securely to the outlet. If using a single-hose setup, ensure the tethered cap is firmly attached to the secondary port to maintain pressure. The pump is fully compatible with any Milwaukee M18 battery; however, ensure the battery door is latched correctly to engage the IPX4 seal before submerging the unit. After use, flush the pump with clean water if it was used in muddy or chemically treated water to prevent sediment buildup in the impeller housing. Always store the unit in a dry environment and inspect the HYDROPASS filter for any lodged larger debris after each shift.