Best current price£14.06from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.06Visit shop B&Q - 10mm Lifting Eyes Eyebolt Ring High Tensile 18mm Length 1.0 Ton Capacity 2Pc
Visit shop2 offers from £14.06 - £16.83
View price history by clicking the chart icon.
This guide is for professionals in construction, marine, and automotive industries needing secure load attachment points. The key benefit is the robust 1.0-ton working load limit for vertical lifts, ensuring safety and reliability. A caveat is that the load capacity significantly reduces if the load is applied at an angle. These eye bolts are manufactured from Grade 80 High Tensile Steel, offering superior strength and durability for lifting machinery and securing loads.
| Model Part Number | AB TOOLS 10MM LIFTING EYES EYEBOLT RING HIGH TENSILE 18MM LENGTH 1.0 TON CAPACITY 2PC |
|---|---|
| Brand | AB Tools |
The Working Load Limit (WLL) is 1.0 Ton (1000 kg) for vertical lifts only. This capacity is significantly reduced if the load is applied at an angle. Always refer to load charts for angled lifts.
It is manufactured from Grade 80 High Tensile Steel, known for its strength and durability.
Yes, but the load capacity must be reduced. If the load is applied at a 45-degree angle, the rating must be reduced to 30% of the WLL (approximately 0.3 tons).
The male thread size is 10mm, and the thread length is 18mm.
The internal hole diameter is 25mm.
Each pack contains 2 x Eyebolts / Lifting Eyes.
The eyebolts have a factor of safety of 4:1, meaning they are designed to withstand four times their rated working load under ideal conditions.
Ensure the mounting surface is adequate and the tapped hole is of the correct size and depth. Reinstall, ensuring the bolt is screwed in fully until the shoulder is flush with the surface. If the mounting surface is insufficient, it may not be able to support the bolt securely.
Clean the affected area with a soft brush. For minor surface rust, a light oil can be applied for protection. If corrosion is deep or compromises the steel's integrity, the eyebolt should be replaced immediately.
Check that the mounting hole is correctly tapped with a 10mm thread. Ensure there are no obstructions or damage to the threads on either the bolt or the hole. Do not force the bolt; seek professional assistance if necessary.
Setup: To install, ensure the mounting surface has a pre-drilled and tapped hole that matches the 10mm male thread of the eyebolt. Screw the eyebolt in until the shoulder is fully seated against the mounting surface. Do not overtighten, but ensure it is snug to prevent rotation. The thread length is 18mm, so the tapped hole should accommodate this depth.
Compatibility: These eyebolts are compatible with any system designed to accept a 10mm male thread and can support a 1.0-ton vertical load. They are suitable for use with ropes, cables, slings, and safety harnesses.
Care: Regularly inspect the eyebolts for any signs of wear, damage, or corrosion. Clean with a dry cloth. Avoid using abrasive cleaners. Store in a dry environment when not in use to prevent rust. Ensure the powder coating is not compromised, as this can lead to corrosion of the underlying steel.
