Best current price£11.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£11.99Visit shop 14'' Car Wheel Tyre Innertube 175/70 R14 185/70 R14 195/70 R14 Straight Valve 5056213503765
Visit shop1 offer from £11.99
View price history by clicking the chart icon.
The PetrolScooter 14-inch car wheel tyre innertube is designed for vehicle owners and mechanics needing a reliable replacement tube for standard passenger car tyre profiles. It provides a secure, air-tight solution for maintaining optimal tyre pressure across multiple common sizes, including 175/70 R14, 185/70 R14, and 195/70 R14; however, it is specifically intended for use with wheels compatible with standard straight Schrader valves and should not be used as a substitute for tubeless-specific tyre setups.
| Model Part Number | 29492 |
|---|---|
| Brand | PetrolScooter |
Yes, this innertube is specifically designed to be compatible with 175/70 R14, 185/70 R14, and 195/70 R14 sizes.
This tube uses a standard straight Schrader valve, the same type found on most passenger car tyres.
While it can be inserted into a tubeless-type tyre, the tyre and rim must be inspected to ensure no sharp points will damage the tube.
The outer diameter of the tube is 610 mm (24.02 inches).
You will need tyre levers to remove and install the tyre on the rim, and a standard air pump or compressor.
Check for pinch points between the tyre bead and the rim, or inspect the valve core to ensure it is tightened properly.
Deflate the tyre and adjust the position of the tube inside the casing until the stem sits perpendicular to the rim.
Ensure the Schrader valve pin is not depressed by the pump chuck and that the air source is functioning correctly.
Before installation, verify that your current tyre is not explicitly marked as 'tubeless only' and that the rim is free of sharp edges or corrosion that could puncture the tube. To install, lightly inflate the tube until it holds a circular shape, place it inside the tyre, and carefully seat the tyre beads onto the rim. Always use a tire lubricant on the beads to ease the process. For care, perform a monthly visual inspection of your tyre pressure to ensure the valve stem is aligned correctly and not under stress from the rim hole.
