Innes 5 Light Semi Flush Ceiling Light - Silver

No, the Innes 5 Light Semi Flush Ceiling Light does not include the E27 light bulbs. These must be purchased separately.

You will need 5 x E27 (Edison Screw) light bulbs. The maximum wattage per bulb is 60W.

Yes, you can use E27 LED bulbs as long as they do not exceed the 60W maximum equivalent and are compatible with dimming if you intend to use the dimming feature.

The fixture has a height of 12cm and a diameter of 31cm.

Yes, the Innes 5 Light Semi Flush Ceiling Light is dimmable, provided you use dimmable E27 bulbs and a compatible dimmer switch.

The finish is a polished chrome and grey.

This light is generally intended for living areas, hallways, or bedrooms. For bathroom installations, please ensure it meets the appropriate IP rating for the specific zone you intend to install it in, which is not specified in the product description.

Check that the power supply is switched on at the mains and the light switch. Ensure bulbs are correctly installed and not burnt out. Verify that the wiring connections are secure.

Remove and re-insert the affected bulbs, ensuring they are properly seated in the E27 sockets. Test each bulb individually in a known working fixture to rule out a faulty bulb.

This could indicate a loose bulb or a problem with the dimmer switch. Ensure all bulbs are tightened. If using a dimmer, check its compatibility with the bulbs being used, especially if they are LED or CFL.

Confirm that the installed bulbs are specifically marked as 'dimmable' and that the wall switch or dimmer control is functioning correctly and is compatible with the type of bulbs installed.