VEVOR Selbstklebende Vinyl-Bodenfliesen - 990 x 60 cm - Hellgraue Holzmaserung

Yes, but you must ensure the grout lines are leveled first, or they will telegraph through the thin vinyl surface over time.

Yes, it is water-resistant, making it ideal for bathroom floors, though you should ensure no standing water is left near the edges.

You only need a sharp utility knife, a measuring tape, and a long straight edge for cutting.

Use a damp mop with mild soap. Avoid excessive water and abrasive scrubbing brushes.

Generally, it is not recommended for high-heat radiant systems as it may affect the adhesive integrity.

They are designed for semi-permanent use. Removal is possible, but it may require a heat gun to soften the adhesive and might leave residue.

Ensure the subfloor is completely clean of dust and oils. If the floor is porous, use a primer for self-adhesive vinyl before installation.

Use a seam roller or a soft cloth to apply firm pressure from the center toward the edges of the sheet to push out trapped air.

Apply a small amount of high-quality vinyl floor adhesive to the underside and weigh it down with a heavy, flat object for 24 hours.