DELL Hard Drive - 4 TB - 7.2K RPM - SATA 6Gb/s
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The DELL 4TB 7.2K RPM SATA hard drive is designed for IT professionals and system administrators looking to scale storage within compatible DELL server environments. It delivers high-capacity storage and efficient 7200 RPM performance, making it ideal for data-heavy workloads and workstation applications. A key caveat for potential buyers is that this unit is specifically designed for server-integrated environments and must be used with compatible hot-plug server chassis, as it is not intended for standalone desktop or external use.
All features
| Series | NPOS |
|---|---|
| Model Part Number | 400-BJTG |
| Brand | DELL |
Extended Product Information
FAQs
Can I use this drive in a standard desktop computer?
No, this drive is specifically engineered for DELL server environments and requires a hot-plug-compatible chassis.
Is the mounting bracket included with the drive?
The drive is designed as a hot-plug unit; ensure your server drive tray is compatible with 3.5-inch SATA drives.
What is the rotational speed of this hard drive?
This drive features a 7200 RPM rotational speed for efficient disk access.
Does this drive support hot-swapping?
Yes, it is designed for hot-plugging, meaning it can be installed or removed while the server is operational, provided the controller supports it.
What is the maximum data transfer rate?
The drive supports an interface transfer rate of 6 Gbit/s via the Serial ATA III interface.
Troubleshooting
Drive not detected by server BIOS or RAID controller
Ensure the drive is fully seated in the bay and the hot-plug latch is locked. Check the RAID controller settings to see if the port needs to be enabled.
Server indicates drive failure or 'degraded' status
Check the RAID controller logs for specific error codes. If the drive is in a RAID array, attempt to rebuild the array or consult your hardware support documentation.
Drive performance appears slow during heavy loads
Check for excessive thermal throttling or high RAID controller overhead. Ensure that the drive is not fragmented at the OS level.
Pros and Cons
Pros
- High storage density for server environments
- Supports hot-swapping for maintenance without system shutdown
- High-speed 7200 RPM performance ensures quick data retrieval
- Reliable SATA III 6 Gbit/s connectivity
Cons
- Specifically restricted for use with compatible DELL servers
- Requires specific backplane support for hot-plug functionality
- Not suitable for standard consumer desktop PCs or external enclosures
Setup, Compatibility & Care
To install the drive, slide it into an empty bay of your DELL server until the latch clicks, ensuring a secure connection to the SATA backplane. Because this is a hot-plug unit, your server controller should automatically detect the new hardware; verify this in your server management software (such as iDRAC or the RAID controller BIOS). Compatibility is strictly limited to DELL systems supporting 3.5-inch SATA hot-plug drives. To maintain drive health, keep the server environment cool and free of dust, and avoid physical shocks or vibrations while the platters are spinning. Always ensure the drive firmware is updated through your server's support portal to maintain peak performance and compatibility.