Johnstone's Trade Quick Dry Polyurethane Floor Varnish - Satin - 2.5L

Coverage is approximately 12m2 per liter.

No, this varnish is specifically formulated for interior use only.

The gloss finish provides a shiny, reflective surface, while the satin finish offers a lower sheen, more subdued appearance.

No, this product is designed for use on timber floors and previously varnished or stained surfaces only.

Clean brushes and rollers immediately after use with water.

The varnish is quick drying, but drying times may vary depending on environmental conditions. Refer to the product label for specific drying times.

Lightly sanding between coats can improve the final finish, especially for the first coat, but it's not always required. Always refer to the product label for specific recommendations.

Ensure adequate ventilation and that the room temperature is within the recommended range. Check the application for excessive thickness.

This may be due to improper surface preparation. Sand the surface and reapply the varnish following the correct procedures.

Avoid over-brushing or rolling. Apply thin, even coats and ensure the brush or roller is of good quality.