Best current price£51.19from B&Q
Shopping.co.uk recommended and popular offers
B&Q£51.19Visit shop B&Q - Horizontal H/duty Restraint Strap 1000mm Length 100mm Bend Galvanised 10Pk
Visit shop1 offer from £51.19
View price history by clicking the chart icon.
This heavy-duty restraint strap from AB Tools is designed for securely connecting timber pieces to masonry structures, offering a robust solution for builders and DIY enthusiasts needing to join wooden beams to brick walls. Its primary benefit is providing strong, regulation-compliant structural reinforcement. A potential consideration is its suitability for light-duty use as specified by the galvanised steel finish. Key features include a 1000mm total length with a 100mm right-angle bend, pre-drilled fixing holes for easy installation, and a galvanised steel construction for durability.
| Model Part Number | FN091_10PK |
|---|---|
| Brand | AB Tools |
The strap features 6mm diameter holes, spaced at 25mm offset centres, to accommodate various fixing types.
The strap is designed for connecting timber to masonry and meets European building regulations. However, it is specified for light-duty use. Always consult building codes and structural engineer recommendations for critical load-bearing applications.
You can use wood screws for the timber side and appropriate metal nails or masonry screws/anchors for the masonry side. Ensure the fixings are compatible with the materials and the 6mm hole size.
The galvanised finish provides a protective layer against rust and corrosion, enhancing the durability and lifespan of the strap, especially in outdoor or exposed environments.
The strap features a single, pre-set right-angle bend, measuring 900mm on one leg and 100mm on the other.
While primarily designed for timber-to-masonry connections, it could potentially be adapted for timber-to-timber joints where a right-angle reinforcement is needed, using appropriate wood screws.
It indicates the strap is intended for general-purpose reinforcement and connection rather than supporting significant structural loads. It's suitable for applications like fence repairs, reinforcing joints, and pinning walls, but not for primary structural supports carrying heavy loads.
The strap has a fixed bend. Ensure you are attempting to connect elements that match the 900mm x 100mm bend configuration. If the dimensions do not match, a different strap type may be required.
Verify that the fixings used are appropriate for both the timber and masonry materials. Ensure the length of the fixings provides adequate embedment in both substrates. For masonry, consider using expansion anchors or appropriate masonry screws.
The galvanised finish offers moderate protection. For increased longevity in exposed conditions, apply a suitable metal paint or sealant. Ensure the strap is not in constant contact with water or highly corrosive substances.
Setup:
Compatibility:
Care:
