Best current price£4.19from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£4.19Visit shop Gtv (25) Furniture Chipboard Confirmat Screws 7X50mm Hex Drive Steel Flat Pack Mdf Screws
Visit shop
B&Q£4.39Visit shop B&Q - Confirmat Screws 7X50mm Hex Drive Steel Right Angle Wood Joinery 25 Pack
Visit shop3 offers from £4.19 - £4.39
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals building or repairing furniture. The GTV Confirmat Screws offer a secure and long-lasting solution for right-angle joints in wood-based materials, ensuring sturdy construction. A potential consideration is the need for specific tools for optimal installation.
| Brand | GTV |
|---|
Confirmat screws are specialized fasteners designed to create strong and stable right-angle joints in wood-based materials like chipboard, plywood, and MDF, commonly used in furniture assembly.
It is highly recommended, especially for denser materials like MDF or plywood, to pre-drill a pilot hole slightly smaller than the screw's diameter to prevent splitting and ensure easier insertion.
You will need a hex (Allen) driver bit that matches the size of the screw head. These are commonly available in sets.
These screws are made of steel and are best suited for interior furniture applications. Prolonged exposure to moisture may lead to rust.
While they can be used on solid wood, they are primarily engineered for engineered wood products. For solid wood, other joinery methods or specialized screws might be more appropriate depending on the application.
The '7' refers to the nominal diameter of the screw in millimeters (approximately 7mm), and '50mm' refers to its length.
Each pack contains 25 Confirmat screws.
Ensure you are using the correct size hex (Allen) bit and that it is fully seated in the screw head. Apply firm, consistent downward pressure while driving the screw. Avoid overtightening, especially in softer materials.
Verify that pilot holes were drilled appropriately for the material thickness. Check that the screw has fully engaged in both pieces of wood. Ensure the screw length (50mm) is sufficient for the combined thickness of the materials being joined.
Confirm that a pilot hole has been drilled. If the material is particularly dense, the pilot hole may need to be slightly larger or a stronger driving tool used. Ensure the screw tip is not damaged.
Setup: To use Confirmat screws, align the two pieces of wood to form a right angle. For best results, especially in harder wood composites, it is recommended to pre-drill a pilot hole slightly smaller than the screw's shank diameter. Insert the screw through the pre-drilled hole in one piece and into the second, using a hex (Allen) driver bit compatible with the screw's head. Drive the screw until it is flush with the surface or countersunk to your desired depth.
Compatibility: These screws are specifically designed for wood-based materials such as chipboard, particleboard, plywood, and MDF. They are best suited for creating right-angle joints. Ensure your project requires 7x50mm screw dimensions and a hex drive.
Care: Store screws in a dry environment to prevent rust. Clean any dust or debris from the screws before use. After installation, clean the surrounding furniture material as per standard wood care practices.
