Simplex Rope Clip Clamp - 6 mm
Best current price£3.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£3.99Visit shop B&Q - 2 X 6 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Visit shopB&Q£3.99Visit shop One Offer
1 offer from £3.99
View price history by clicking the chart icon.
B&QB&Q - 2 X 6 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Free delivery in 1–3 days
£3.99
Visit shop
Product Information
Full details
This guide is for anyone needing to create secure loops in wire ropes, synthetic ropes, or jute ropes. The SolaDirect Simplex Rope Clip Clamp for 6 mm rope offers a reliable way to fix the loose end of a loop back onto the rope, enabling straightforward connections to other hardware. While robust for its intended use, proper tightening is crucial to ensure safety and security.
All features
| Brand | SolaDirect |
|---|
Extended Product Information
FAQs
What is the primary function of a Simplex rope clip clamp?
Its primary function is to create a secure loop (eye) in a rope by clamping the loose end back onto the standing part of the rope.
Can I use this 6 mm clamp on a 7 mm rope?
No, it is crucial to match the clamp's specified diameter (6 mm) to the rope's diameter for a secure and safe connection. Using an incorrect size can lead to failure.
How many clamps should I use for a 6 mm rope?
For most wire rope applications, a minimum of three clamps is recommended for safety and reliability. Always consult load charts or engineering guidelines for specific applications.
What is the difference between a Simplex and a Duplex rope clip?
A Simplex clamp uses a U-bolt and two nuts, while a Duplex clamp typically uses a saddle and two bolts, offering a slightly different clamping mechanism. The Simplex is generally considered the standard for most applications.
Where should the U-bolt part of the clamp be placed?
The U-bolt should always be placed on the 'dead end' or loose end of the rope, while the saddle should be on the 'live end' or the main part of the rope under tension. This configuration ensures the clamp grips the rope securely under load.
Are these clamps suitable for overhead lifting applications?
While they provide secure loops, their suitability for critical overhead lifting depends on the specific load, safety factors, and regulatory compliance. Always consult relevant standards and experts for overhead lifting applications.
Troubleshooting
Clamp feels loose after tightening
Ensure you have used the correct number of clamps for the rope diameter and load. Re-tighten the nuts, ensuring even pressure. Check if the rope has compressed and tighten again after initial use.
Difficulty fitting clamp onto rope
Verify that the clamp diameter matches the rope diameter precisely. If using a thimble, ensure it is correctly seated within the loop before applying the clamp.
Visible corrosion or rust on clamp
Clean the clamp with a wire brush. If corrosion is significant and affects the clamp's integrity, it should be replaced immediately. For minor surface rust, apply a light coat of appropriate lubricant.
Pros and Cons
Pros
- Reliably secures rope loops for secure connections.
- Compatible with multiple rope types (wire, jute, polypropylene).
- Precise fit with matching rope diameter.
- Facilitates easy integration with other hardware.
Cons
- Requires proper torque for maximum security; over or under-tightening can compromise safety.
- May not be suitable for extremely high-load applications without additional safety measures.
- The 6 mm size is specific and not interchangeable with other rope diameters.
Setup, Compatibility & Care
Setup:
- Form a loop in the rope of the desired size.
- Place the rope clip clamp so the U-bolt is on the loose end (dead end) of the rope and the saddle is on the main part of the rope (live end).
- Tighten the nuts on the U-bolts evenly and progressively. It is recommended to tighten them to the torque values specified by the rope manufacturer or a recognized standard.
- After initial use, re-tighten the nuts as the rope may compress.
Compatibility:
- Designed for 6 mm diameter ropes, including steel wire rope, jute, and polypropylene ropes.
- Use in conjunction with thimbles for wear protection in loops.
- Suitable for connecting to turnbuckles, shackles, and other rigging hardware.
Care:
- Inspect regularly for signs of wear, corrosion, or damage.
- Ensure nuts remain tight; check periodically and re-tighten as needed.
- Clean with a dry cloth; avoid harsh chemicals that could degrade rope material or corrode the clamp.