Best current price£16.32from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£16.32Visit shop Diy Waterproof Electronic Abs Plastic Project Junction Box Enclosure 200Mm X 120Mm X 75Mm Black 711931719373
Visit shop2 offers from £16.32
View price history by clicking the chart icon.
The Therpin Tech Electronic Project Junction Box is an essential enclosure for DIY electronics hobbyists and professional engineers who need a durable, weather-resistant housing for custom circuits. Offering an IP65 ingress protection rating, it provides reliable defense against dust and splashing water, making it suitable for both indoor and outdoor instrumentation projects; however, users should note that while it is highly customizable, the rigid plastic construction requires careful drilling to avoid cracking.
| Brand | Therpin Tech |
|---|
No, it has an IP65 rating, which means it is protected against dust and splashing water, but it is not intended for full submersion.
Yes, the plastic surface can be painted, but you should lightly scuff it with fine-grit sandpaper and use a plastic-adhesion primer for the best results.
A handheld drill with step bits or a rotary tool with a cutting attachment are the best tools for making custom holes.
Yes, the box includes the necessary screws to secure the lid to the base.
While durable, prolonged exposure to direct, intense sunlight may eventually degrade the plastic; using it in shaded areas or adding a UV-protective coating is recommended for long-term outdoor use.
The wall thickness is 3mm, providing a rigid and durable structure for your projects.
Verify that the rubber seal (gasket) is correctly seated in its groove and that all lid screws are tightened evenly.
Ensure you are using a sharp drill bit designed for plastics and apply minimal pressure. Let the bit do the work at a moderate speed.
Use the internal screw holes to secure a custom mounting board or use PCB spacers to firmly attach your circuit boards to the box base.
To set up your project, first map out the locations for your connectors and displays on the exterior of the box. Use a step drill bit at a low speed to create smooth, clean holes for your components. Once your electronics are secured to the internal standoffs, ensure the gasket is seated correctly in the lid before tightening the screws to maintain the water-resistant seal.
Care for the box is minimal: wipe down the exterior with a damp cloth to remove dust. Avoid using harsh chemical solvents for cleaning, as these may cloud or weaken the plastic over time.
