ATEK Pack of 3 USB C Female to USB A Male Adapters - 5Gbps

The adapter has a male USB-A connector that plugs into your computer or charger. It also has a female USB-C port where you plug in your standard USB-C cable. This setup allows your USB-C cable to connect to a USB-A port.

No, these adapters are designed for data transfer and charging only. They do not support alternate modes like DisplayPort or HDMI over USB-C.

The adapters support USB 3.1 Gen 1 (also marketed as USB 3.0), with a maximum theoretical data transfer speed of 5Gbps.

Yes, they are backward compatible. However, if plugged into a USB 2.0 port, the data transfer speed will be limited to the USB 2.0 standard (480Mbps).

You can connect any device that uses a USB-C cable for charging or data transfer (like smartphones, tablets, external SSDs) to any port that accepts a USB-A connector (like computers, laptops, power banks, wall chargers).

This is a value pack that includes three (3) USB-C female to USB-A male adapters.

The adapters are constructed from a combination of high-quality aluminum alloy and durable plastic.

Ensure the USB-C cable is fully plugged into the adapter and the adapter is firmly seated in the USB-A port. Try a different USB-A port on your host device or try a different USB-C cable.

Verify that both the host device's USB-A port and the USB-C cable support USB 3.1 Gen 1 (5Gbps) or higher. Older USB 2.0 ports will limit speeds to 480Mbps.

Gently inspect the USB-A port on your device and the connector on the adapter for any debris or damage. Ensure the adapter is inserted straight and fully.

Confirm that the USB-A port you are using supports power output. Some low-power USB-A ports may not provide sufficient charge. Test with a dedicated USB-A wall charger.