Connect Sensor Kit - 3 Pin - 35 Piece

This kit is designed as an OEM replacement for part number 7283-8730-30, typically found on specific Mercedes-Benz and BMW models with 3-pin sensor connectors. Always confirm your vehicle's specific part number requirement.

The kit includes 5 female 3-pin connectors, 15 terminals, and 15 seals.

You will need a suitable crimping tool to attach the terminals to the wires, and potentially wire strippers and a small pick or screwdriver for assisting with connector assembly.

No, this kit is specifically designed for 3-pin sensor connectors only.

Properly insert the included seals into the designated grooves within the female connector housing before seating the wires and terminals. Ensure the seal sits flush and creates a tight barrier around the wires.

OEM replacement means the part is designed to meet or exceed the specifications of the original equipment manufacturer, ensuring compatibility and performance equivalent to the original part.

Store the remaining connectors, terminals, and seals in the original blister pack or a similar small, organized container in a dry, clean location away from extreme temperatures.

Ensure terminals are fully seated within the connector housing and that the locking tab on the connector is not damaged. Verify correct orientation of terminals.

Double-check that terminals are properly crimped onto the wires. Inspect wires for any breaks or damage. Ensure the seal is correctly positioned and not obstructing the terminal connection.

Make sure the terminals are the correct type for the housing and are not bent. Ensure the seals are properly aligned within the housing before attempting to insert wires.