WoStick Peel and Stick on Tiles Splashback Subway Self Adhesive Wall Tiles Tile Stickers for Kitchen & Bathroom - Black

Yes, they can be removed, but care should be taken. Gently heat the tile with a hairdryer on a low setting to soften the adhesive, then slowly peel it away. Some residue may remain and can be cleaned with an appropriate adhesive remover.

The tiles themselves are water-resistant and suitable for splashback areas. However, they are not designed for constant submersion or areas with excessive moisture, and the adhesive's performance can be affected by prolonged wetness.

Each pack contains 10 sheets of tiles.

Each tile measures 30.5cm x 30.5cm. The individual chip size within the tile is 8.4cm x 4.8cm.

Only if the existing tiles are perfectly smooth, clean, and have no grout lines or imperfections. Application over grout lines will likely result in an uneven finish and potential adhesion issues.

A soft, damp cloth with a mild, non-abrasive cleaner is recommended. Avoid harsh chemicals or scrubbing pads that could scratch or damage the surface.

Yes, the silver backing is designed to prevent transparency, ensuring that the original wall color or pattern is covered.

Ensure the surface is perfectly clean, dry, and smooth. Re-apply pressure to the tile. If the issue persists, the surface may not be suitable.

Gently lift the tile and reapply, smoothing from the center outwards. For small bubbles, you can try carefully piercing with a pin and pressing flat.

Use a sharp utility knife or heavy-duty scissors. Score the line multiple times for a cleaner cut. Test cuts on a spare piece if available.

Press firmly along the edges. Ensure no moisture or dust has compromised the adhesive. Consider using a small amount of tile adhesive specifically designed for backsplashes if adhesion is a persistent problem in a high-moisture area.