Best current price£46.93from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£46.93Visit shop Legrand Green Remote Control For Switch Motion Detectors - 088235
Visit shop1 offer from £46.93
View price history by clicking the chart icon.
The Legrand 088235 is a configuration tool designed for use with Legrand's wireless switching systems, specifically those compatible with motion detectors. It offers a key benefit of allowing pre-set configurations and detection sensitivity adjustments for lighting management sensors. A potential caveat is its limited 4-meter infrared range, making it suitable for localized control. This tool simplifies the setup of intelligent lighting systems by enabling easy adjustment of lighting thresholds and time delays.
| Colour | Green |
|---|---|
| Model Part Number | 0 882 35 |
| Brand | Legrand |
The Legrand 088235 configuration tool has a maximum operating range of 4 meters for its infrared signal transmission.
No, this configuration tool is specifically designed for use with Legrand wireless switching systems that are compatible with motion detectors.
You can adjust the lighting threshold (lux level) using the pre-set buttons on the handheld transmitter. Specific lux values (e.g., 300 or 500) can be selected based on the sensor's capabilities.
The walkthrough function is a setting that keeps the light on as long as motion is detected, even after the initial time delay has expired. This is useful for areas where continuous presence is expected.
Yes, all sensors come with pre-set configurations from the factory, which can then be further adjusted using the configuration tool.
The Legrand 088235 is made of thermoplastic and has an untreated surface finish.
Refer to the specific user manual for the connected Legrand motion detector. Reset procedures may vary, but often involve a sequence of button presses on the sensor or using the configuration tool in a specific mode.
Ensure the handheld transmitter is within the 4-meter range and has a clear line of sight to the sensor. Check that the transmitter's batteries are functional.
Verify that the motion detector is correctly powered and paired with the lighting system. Check the detection sensitivity settings via the configuration tool.
Adjust the time delay setting using the configuration tool to a longer duration. Ensure the walkthrough function is activated if continuous light is desired during occupancy.
Remove any obstructions between the transmitter and the sensor. Ensure there are no strong infrared sources nearby that could interfere with the signal.
Setup:
Compatibility:
Care:
