Best current price£6.92from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.92Visit shop B&Q - Tx Double-Countersunk Yellow-Passivated Steel Wood Screw (Dia)5mm (L)40mmPack Of 100
Visit shop1 offer from £6.92
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals working with wood. The TurboDrive Tx Wood Screw offers a reliable fastening solution for various projects with its durable steel construction and zinc plating. A potential caveat is the specific yellow zinc finish, which may not be suitable for all aesthetic requirements.
| Colour | Yellow |
|---|---|
| Brand | TurboDrive |
You will need a Tx (Torx) compatible bit that matches the size of the screw head.
The yellow zinc plating offers some corrosion resistance, making them suitable for temporary outdoor use or in protected outdoor environments. For long-term outdoor exposure, consider screws with specialized outdoor coatings.
A double countersunk head allows the screw to sit flush or slightly below the surface of the wood, creating a cleaner and more professional finish without damaging the wood surrounding the screw head.
Yes, they can be used in MDF and particleboard. It is recommended to pre-drill pilot holes to prevent material damage and ensure a secure hold.
Specific tensile strength data is not provided, but they are constructed from durable steel designed for general woodworking applications.
While paint may adhere, results can vary. It's advisable to use a primer designed for metal surfaces if painting is required for aesthetic purposes.
Ensure you are using the correct size Tx bit and that it is fully seated in the screw head. Reduce driving speed and apply firm, consistent pressure.
Pre-drill a pilot hole slightly smaller than the screw's diameter. For very hard woods, a pilot hole of the same diameter as the screw shank may be necessary.
Confirm the pilot hole is adequately countersunk to accommodate the screw head. Ensure you are not over-driving the screw, which can push wood fibers up.
Setup: To use the TurboDrive Tx Wood Screws, you will need a drill or screwdriver equipped with a Tx (Torx) compatible bit that matches the screw head size. Ensure the wood is properly pre-drilled if necessary, especially in hardwoods, to prevent splitting. Drive the screws slowly at first to ensure they engage correctly, then increase speed. The double countersunk head should sit flush with the surface of the wood.
Compatibility: These screws are designed for use in wood. They are compatible with most common wood types, including pine, oak, and plywood. The Tx drive is a standard fitting, commonly found on modern power tools.
Care: Store screws in a dry environment to prevent premature corrosion, despite the zinc plating. Clean any dust or debris from the screws after installation if aesthetics are critical.
