Best current price£80.26from eBay
Shopping.co.uk recommended and popular offers
eBay£80.26Visit shop Upol PLAS/5LG Plast X LIGHT GREY PAINT Plastic Bumper Trim Aerosol U-Pol X 5
Visit shop2 offers from £80.26 - £87.59
View price history by clicking the chart icon.
The U-Pol Plast X Plastic Bumper Trim Aerosol is designed for automotive enthusiasts and professionals looking to restore or refresh plastic bumper and trim components. It provides a durable, professional-grade satin finish that restores the factory appearance of weathered plastic parts. While it offers excellent coverage and fast-drying properties, it is essential to note that the surface must be properly primed and cleaned beforehand to ensure long-term adhesion and performance.
| Colour | Grey |
|---|---|
| Model Part Number | PLAS/5LG/5 |
| Brand | U-Pol |
Yes, light sanding with fine-grit abrasive is recommended to promote mechanical adhesion, especially if the plastic is smooth.
While formulated for bumpers, it can be used on interior plastics; however, ensure the area is well-ventilated during and after application.
It is designed for standard automotive exterior conditions, but it is not intended for use on high-heat components like engine covers or exhaust areas.
No, it is a self-finishing topcoat designed to provide a durable satin look on its own.
While touch-dry in minutes, it is best to allow the paint to cure for at least 24 hours before exposing it to rain or highway driving conditions.
You are applying the coats too heavily. Apply thinner, multiple coats with a flash-off time of 5-10 minutes between each.
The surface was likely not cleaned sufficiently or lacked a suitable plastic primer. Ensure the plastic is de-greased and primed before painting.
The nozzle may be clogged. Remove it and clean with a solvent, or replace it if necessary.
Before use, ensure the plastic surface is completely free of grease, silicone, and wax. Mask off surrounding areas to prevent overspray on body panels. Always shake the can vigorously for at least two minutes before starting. Apply in light, sweeping passes rather than one heavy coat to prevent runs or sags. After finishing your project, invert the can and spray for a few seconds to clear the nozzle, which prevents the internal straw from clogging during storage.
