Best current price£84.00from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£84.00Visit shop AIM Oil / Water (Coolant) Temperature Sensor - Water / Oil Temperature Sensor, 1/8" NPT
Visit shop3 offers from £84.00
View price history by clicking the chart icon.
This AiM Motorsport Analogue Sensor is designed for professional racing and performance applications, allowing precise monitoring of water or oil temperature to optimize engine efficiency and longevity. Its main benefit is providing critical real-time data for engine management. A potential caveat is the need for specific AiM loggers and harnesses for seamless integration.
| Model Part Number | X05NPTA4513BPRS |
|---|---|
| Brand | AIM |
The sensor operates accurately within a temperature range of 0 to 150 degrees Celsius.
Yes, this sensor is designed for measuring both engine oil and water (coolant) temperatures.
The sensor has a standard 1/8" NPT thread for installation and a male 4-pin black 719 binder plug for connection to AiM devices.
Yes, for AiM EVO4 or EVO4S loggers, you will need a 712-719 extension lead to connect this sensor.
The integrated cable sensor length is 25cm.
For water temperature, it is recommended to install the sensor in the pipe that goes from the radiator to the engine cylinder head.
Yes, AiM offers 719-719 extension leads in various lengths (0.5 to 3 meters) to extend the distance between the sensor and your AiM logger/display.
Verify the 4-pin binder plug is securely connected to the AiM logger/display. Check that the correct input channel is configured in the logger settings. Ensure the sensor is properly threaded into the engine component and not cross-threaded.
Confirm the sensor is installed in a location that accurately reflects the fluid temperature (e.g., not in a stagnant area). Ensure the fluid has reached operating temperature for a stable reading. Check for any obstructions or fouling on the sensor tip if accessible.
Use the appropriate 712-719 extension lead to connect the 719 sensor plug to the 712 logger input.
This may indicate a sensor fault or a wiring issue. Inspect the sensor and its wiring for any damage. If damage is found, the sensor may need replacement.
Setup: The sensor features a 1/8" NPT fitting, which screws directly into a compatible port on your engine's cooling system or oil system. Ensure a secure, leak-free fitment. The sensor's 4-pin binder plug connects directly to the appropriate harness input on your AiM logger or dash display.
Compatibility: This sensor is designed for use with AiM loggers and dash displays that feature 4-pin binder connectors (719 series), such as the MXS, MXP, MXG, MXL (Strada and Pista), MXL2, EVO5, and MXm. For AiM EVO4 / EVO4S loggers or Channel Expansion units, which use 712 connections, a 712-719 extension lead is required.
Care: Clean the sensor's connection points periodically with a dry, lint-free cloth to ensure optimal signal integrity. Avoid exposing the sensor to excessive vibration or physical impact. Regular checks of the installation for any signs of leaks or damage are recommended.
