Unior Chain Breaker, Press and Riveting Tool for Motorbike - 3200/2BI
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for motorcycle mechanics and enthusiasts who need a reliable tool for chain maintenance. The Unior 3200/2BI tool offers a robust solution for breaking, pressing, and riveting motorcycle chains, ensuring precise and durable chain work. Keep in mind that specific chain types may require specific pin sizes; ensure correct pin selection for optimal results.
All features
| Model Part Number | 3200/2BI |
|---|---|
| Brand | Unior |
Extended Product Information
FAQs
What kind of chains is this tool compatible with?
This tool is designed for DID, Regina, and RK chains with graduations 520, 525, 530, and 532.
What materials is the tool made of?
The Unior 3200/2BI tool is made from premium flex plus carbon steel with a trivalent chrome-plated surface finish.
How do I choose the right pin size?
Select the pin size (3, 3.5, or 5 mm) that matches your chain's specifications. Consult your chain's manual.
What is the purpose of the pressing adaptors?
The pressing adaptors are used during chain assembly to ensure the side plates are properly seated.
How do I rivet the chain?
Use the correct riveting pin (Type A, B, or C) and deform the pin head to the manufacturer-recommended diameter of 5.5 to 5.8 mm.
How do I maintain the tool?
Clean the tool after each use, store it in a dry place, and lubricate moving parts periodically.
What should I do if the pin gets stuck during chain breaking?
Ensure the correct pin size is used. Apply penetrating oil and try again. Be careful not to damage the chain.
Where can I find more detailed instructions?
Refer to the Unior tool's documentation or the chain manufacturer's instructions for detailed procedures.
Troubleshooting
Pin gets stuck during chain breaking.
Ensure the correct pin size is used. Apply penetrating oil and try again, taking care not to damage the chain.
Riveting pin not deforming the pin head correctly.
Check the riveting pin type and ensure it is the correct type for your chain. Ensure the pin head is deformed to the manufacturer-recommended diameter of 5.5 to 5.8 mm.
Tool feels difficult to operate.
Ensure the chain is properly aligned in the tool. Check for any obstructions. Lubricate the tool's moving parts.
Pros and Cons
Pros
- Durable construction from premium flex plus carbon steel.
- Ergonomic handle for comfortable use.
- Wide compatibility with various chain types and sizes.
- Interchangeable pins for disassembly without grinding.
- Precise riveting for secure chain assembly.
- Designed to meet ISO 1456:2009 standards.
Cons
- Requires selecting the correct pin size for specific chains.
- May require some experience with chain maintenance.
- Limited to motorcycle drive chains.
- Specific chain types not explicitly listed.
Setup, Compatibility & Care
- Setup: The tool arrives ready to use. Ensure all components are present and in good condition.
- Compatibility: This tool is compatible with DID, Regina, and RK chains with graduations 520, 525, 530, and 532. Always verify chain compatibility before use.
- Care: Clean the tool after each use with a dry cloth. Store in a clean, dry environment. Lubricate moving parts periodically to ensure smooth operation. Check and replace any worn or damaged pins to maintain tool effectiveness.