These Securfix trade pack frame fixings are designed for secure attachment in masonry applications...These Securfix trade pack frame fixings are designed for secure attachment in masonry applications. Each piece features an M10 threaded design with a durable finish, making them suitable for reliable structural installation. This pack provides the essential hardware needed for frame mounting projects.
The Securfix Trade Pack Frame Fixings are designed for professional contractors and DIY enthusiasts who require a reliable solution for mounting frames to masonry surfaces. These M10 threaded fixings provide a high-strength, secure hold for structural installations, ensuring durability in demanding environments. While these fixings offer excellent load-bearing capabilities, users should note that they are specifically engineered for masonry and are not suitable for use in soft materials like hollow drywall without appropriate anchors.
All features
Colour
White
Brand
B&Q
Extended Product Information
FAQs
Are these fixings suitable for outdoor use?
They are designed for structural masonry; however, for long-term exterior use in high-moisture environments, ensure they are checked for signs of oxidation periodically.
Can I use these in hollow bricks?
No, these fixings rely on the expansion and friction against a solid masonry substrate to remain secure.
What is the diameter required for the drill bit?
Always check the packaging for the specific millimeter diameter required, as it must match the M10 sleeve dimension exactly for a secure fit.
Is the finish paintable?
Yes, the durable white finish can be painted over if you need to match the color of the surrounding wall or frame.
Do I need a hammer drill to install these?
Yes, a hammer drill is recommended for the most efficient and accurate penetration into solid masonry.
Troubleshooting
Fixing spins inside the masonry hole
The drill hole may be slightly too large; use a slightly smaller drill bit size next time or use an anchor adhesive to fill the void.
Fixing will not seat flush with the surface
Check the hole for debris or remaining brick fragments that may be obstructing the insertion.
Difficulty threading the fastener
Ensure the anchor sleeve is perfectly perpendicular to the surface; misalignment can cause the thread to bind.
Pros and Cons
Pros
High-strength M10 threading for heavy-duty support
Professional-grade durability for masonry projects
Reliable structural attachment
Convenient pack size for medium-to-large installations
Cons
Not intended for use in wood or hollow materials
Requires professional-grade masonry drill bits
White finish may require painting if color matching is needed on specific wall surfaces
Setup, Compatibility & Care
Preparation: Drill a hole into the masonry using a high-quality carbide-tipped masonry drill bit of the appropriate diameter for the M10 sleeve.
Cleaning: Use a blower or vacuum to remove all dust and debris from the hole before insertion; residual dust can significantly reduce the grip of the fixing.
Insertion: Tap the fixing into the hole until the collar is flush with the mounting surface, ensuring the threading is aligned with the frame hole.
Compatibility: These are compatible with standard M10 hardware and are best used in solid brick, concrete, or stone blockwork.
Care: While the white finish is durable, avoid using abrasive chemical cleaners that may damage the coating. Periodic inspection of the frame integrity is recommended for high-traffic installations.