Universal Inox & Metal Cutting Disc 115mm X 1mm X 22.2mm - Pack Of 5

These discs are specifically designed for cutting stainless steel (inox) and other metals, including mild steel, aluminum, and non-ferrous alloys.

You need an angle grinder compatible with 115mm discs and a standard 22.2mm arbor (bore size).

No, these are cutting discs designed for making straight cuts. They are not intended for grinding or polishing applications.

The lifespan of a disc depends on the type of metal being cut, the thickness of the material, the power of the grinder, and the technique used. For optimal results, use steady pressure and avoid forcing the cut.

These discs are manufactured with a 22.2mm bore. If your angle grinder uses a different arbor size, you may need an adapter if available and safe, or a disc with the correct bore size for your tool.

Always wear safety glasses or a face shield, gloves, and hearing protection. Ensure the work area is clear and the workpiece is securely clamped. Never use a damaged disc.

Ensure the disc is correctly mounted and tightened. Avoid excessive side pressure or twisting the disc during the cut. Check that the grinder's power is appropriate for the material being cut.

Verify that the correct disc type is being used for the material. Ensure the disc is not dull or worn out. Check for any obstructions in the cut path or excessive pressure being applied.

Apply steady, light pressure and allow the disc to do the work. Ensure adequate cooling for the workpiece if necessary. The disc is designed for cutting, not prolonged grinding contact.

Check that the disc is properly seated on the spindle and that the flange nuts are securely tightened. Ensure the angle grinder's spindle is not damaged.