tesa UK Powerbond Ultra Strong Foam Double Sided Tape - 5 X 19 Mm

The tape can hold up to 10kg per 10cm of tape applied, provided it is used on suitable smooth, firm surfaces and applied correctly.

It is not recommended for use on wallpaper, especially textured or delicate types. It is best suited for smooth, firm surfaces like painted walls, tiles, or metal.

While it provides a strong bond, it is not specifically designed for constant immersion in water. It is suitable for general indoor use, including bathrooms, but prolonged exposure to high humidity or direct water contact may affect adhesion over time.

This is a permanent tape. Removal is difficult and may damage the surface. If necessary, gently warm the tape with a hairdryer on a low setting and carefully attempt to peel it off.

The product description does not specify outdoor use. It is generally intended for indoor applications on smooth, firm surfaces.

The tape is designed for flat objects up to a maximum thickness of 10mm.

Yes, the foam core allows the tape to compress slightly and conform to minor surface irregularities, enhancing adhesion on surfaces that are not perfectly flat but still smooth and firm.

Ensure surfaces were thoroughly cleaned, dried, and degreased before application. Verify the object thickness is within the 10mm limit and the surface is smooth and firm. Press firmly for the recommended duration on both sides.

Use a fingernail or a thin, flat tool (like a plastic scraper) to carefully lift an edge of the backing. Avoid using sharp metal objects that could damage the adhesive.

The weight of the item may exceed the tape's capacity for the length used. Increase the amount of tape applied (10cm per kg). Re-apply following surface preparation and application instructions precisely.

This tape is permanent. If mistakenly applied, attempt removal with care using a hairdryer on a low setting to warm the adhesive, then gently pry the item off. Be prepared for potential surface damage.