Best current price£23.95from eBay
Shopping.co.uk recommended and popular offers
eBay£23.95Visit shop PRO XL 2K CLEAR LACQUER PETROL RESISTANT AEROSOL SPRAY PAINT - 500ML - PROXL
Visit shopeBay£43.95Visit shop PRO XL 2K CLEAR LACQUER X2 PETROL RESISTANT AEROSOL SPRAY PAINT - 500ML - PROXL
Visit shop10 offers from £23.95 - £294.95
View price history by clicking the chart icon.
The Frost 2K Clear Coat Paint Lacquer is designed for automotive enthusiasts and DIY painters seeking a professional-grade, high-gloss finish. This isocyanate-based formula offers exceptional scratch resistance and long-lasting gloss retention, making it ideal for refinishing vehicle components or small bodywork projects. While it delivers a superior crystal clear appearance, it requires careful handling due to the inclusion of isocyanates and a fixed pot life once the aerosol is activated.
| Colour | White |
|---|---|
| Model Part Number | PRO2KCLEAR5 |
| Brand | Frost |
| Container Volume | 500ml |
2K refers to a two-component system where a hardener is mixed with the resin to create a chemical reaction for a durable, hard finish.
It is best used over properly cured automotive base coats; always perform a test patch on a scrap piece to check compatibility.
You can begin machine polishing 24 hours after application, provided the ambient conditions have allowed for proper drying.
Yes, because the lacquer contains isocyanates, you must wear a suitable respirator, gloves, and eye protection during application.
Coverage depends on the number of coats and technique, but it is typically suitable for smaller vehicle components or spot repairs.
Check ambient temperature and humidity levels; cool or damp conditions can significantly slow the curing process.
Ensure the can is shaken thoroughly before use and clear the nozzle by holding it upside down to spray propellant through the tip.
This is often caused by spraying from too far away or improper thinning; ensure even overlapping strokes and consistent pressure.
Before starting, ensure your workspace is well-ventilated. Due to the isocyanate content, always wear a suitable respirator mask, protective gloves, and eye protection. To activate the aerosol, follow the specific instructions on the canister to release the hardener into the lacquer. Shake the can thoroughly for at least two minutes to ensure the components mix correctly. Once activated, the paint has a limited pot life, so it should be used in a single session. Store the canister in a cool, dry place away from direct sunlight before activation. After application, clean the nozzle by inverting the can and spraying until clear to prevent the internal passage from clogging.
