BlueSpot 24mm Deep Impact Hex Socket - CRV Steel - 1/2"" Drive

The socket is manufactured from high-grade chrome vanadium steel, known for its strength and durability.

The blackened phosphate coating provides enhanced resistance to corrosion and rust, extending the life of the socket.

Yes, it is fully compatible with all standard 1/2" drive tools, including ratchets, breaker bars, and torque wrenches, as well as impact wrenches.

The socket is capable of withstanding up to 566Nm of torque.

Yes, its robust construction and deep engagement design make it well-suited for high-torque applications, including those involving tight or rusted fasteners, especially when used with an impact tool.

The socket has precise dimensions of 134mm (width) × 51mm (depth) × 33.9mm (height) and weighs 301g.

After use, wipe the socket clean with a dry cloth, store it in a dry place, and avoid harsh chemicals. Regular inspection for wear is also recommended.

Ensure the fastener is indeed a 24mm hex head. Verify that the socket is fully seated onto the fastener head and not at an angle.

Check for dirt or debris on both the socket and the fastener. Ensure you are using adequate downward pressure, especially with manual tools. For impact tools, ensure the tool's anvil is in good condition.

Wipe the socket thoroughly and dry it. Apply a light coat of tool oil to the surface and store in a dry location. For minor rust, a wire brush can often remove it.

Ensure the drive tool's anvil is not damaged or worn. Check if the socket's internal drive recess has any debris. If the socket's drive opening is damaged, it may need replacement.