Kingspan Thermawall TW50 Insulation Boards - 50mm

The thermal conductivity is 0.022 W/mK.

It can be used in floors, walls, and roofs.

Yes, it is designed for straightforward installation.

Store the boards in a dry place, away from direct sunlight and moisture.

A fine-toothed saw is recommended for precise cuts.

Depending on your application and local building codes, a vapor barrier may be required. Always refer to local building regulations and manufacturers guidelines for best practice.

It reduces heat loss in winter and heat gain in summer, leading to lower energy consumption for heating and cooling.

Yes, it can be used with other insulation materials to meet specific project requirements.

Check for gaps or voids in the insulation. Ensure all joints are properly sealed. Review installation instructions.

Use a sharp, fine-toothed saw designed for insulation materials. Ensure the board is firmly supported during cutting.

Check for any breaches in the vapor barrier and seal them. Ensure proper ventilation in the building.