Lensbaby Spark 2.0 Lens - Fujifilm X

No, the Lensbaby Spark 2.0 is a fully manual lens. Focusing is achieved by squeezing the flexible lens body.

The Optic Swap system allows you to detach the front optic from the lens body and replace it with other compatible Lensbaby optics to achieve different visual effects.

The Spark 2.0 features an internally adjustable 12-blade aperture. You control this using a dial located on the lens body.

Yes, the manual focus and unique focusing mechanism can be very effective for creating cinematic focus pulls in video.

The maximum aperture depends on the optic installed. The Spark 2.0 body itself has an internal aperture, but the overall light gathering is influenced by the mounted optic.

No, this is a manual lens and does not transmit electronic data to the camera body, meaning no EXIF data for aperture or focus will be recorded.

Use a soft lens brush to remove dust, followed by a microfiber lens cloth. For smudges, a small amount of lens cleaning fluid on the cloth can be used.

Ensure the lens is fully seated in the camera mount. Check camera settings to allow shooting without a lens if your camera has that option, or ensure manual lenses are permitted.

Practice the squeeze-to-focus technique. Utilize your camera's focus peaking or magnification features. Ensure the aperture is not set too wide open if maximum sharpness is desired.

This can be an intended effect depending on the Optic Swap lens used. If a sharper image is desired, ensure the lens is properly focused and consider closing down the aperture slightly.

This may occur at very wide apertures with certain optics. Adjusting the aperture to a smaller f-stop should resolve this.