V33 Extreme Protection Wood Varnish - Medium Oak Gloss - Brown

This varnish is ideal for interior furniture and woodwork such as tables, chairs, cabinets, doors, and decorative items. It is not intended for floors or exterior use.

The wood must be clean, dry, and free from dust, grease, and old finishes. Sand lightly to ensure good adhesion and wipe away all dust.

For best results, it's recommended to remove any old finishes. If applying over an existing compatible finish, ensure it is clean and lightly sanded.

Generally, two to three thin coats are recommended for optimal protection and finish. Always allow adequate drying time between coats.

Drying times vary depending on temperature and humidity. Typically, it's touch-dry in about 2 hours and ready for a recoat in 4-6 hours. Full curing can take several days.

Clean using a soft, damp cloth. Avoid abrasive cleaners or solvents, as they can damage the protective coating.

The ceramic particles are finely integrated into the varnish and do not alter the visual appearance or gloss level, but they significantly enhance the surface's hardness and resistance.

Ensure the varnish is thoroughly stirred before application. Apply in thin, even coats, working with the grain. Avoid over-brushing.

This can occur if applied too thickly or in humid conditions. Ensure adequate drying time and ventilation. If still tacky after extended periods, a very light sanding might be needed, followed by a new, thin coat.

The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants. Old finishes may need to be fully removed before application.

Apply thinner coats and use a high-quality brush. Avoid excessive brushing. Feather the edges of each stroke to blend.