Best current price£22.30from www.tooltime.co.uk
Shopping.co.uk recommended and popular offers
www.tooltime.co.uk£22.30Visit shop Voche Red 150mm Air Hammer Chisel + 4 Chisels + Needle Descaler Rust Remover
Visit shop2 offers from £22.30 - £32.95
View price history by clicking the chart icon.
The Voche 150mm Air Hammer Drill Gun (VH080-247) is a professional-grade pneumatic tool designed for mechanics, automotive enthusiasts, and serious DIYers who require high-impact force for metal cutting and surface preparation. It excels at tasks like exhaust work, rust removal, and paint stripping through its versatile chisel kit and needle de-scaler attachment; however, users should note that it requires a robust air compressor setup with a consistent 90 PSI output to maintain optimal performance.
| Model Part Number | VH080-247 |
|---|---|
| Brand | Voche |
You need a compressor capable of supplying a constant 90 PSI and at least 4 CFM of air flow.
This tool is primarily designed for automotive and metal-working applications; it is not recommended for heavy masonry work.
Apply 3-4 drops of high-quality air tool oil into the air inlet before each use.
Yes, a coil spring chisel retainer is included in the package.
The black oxide finish on the de-scaler is specifically applied to resist corrosion and increase the longevity of the metal.
The needle de-scaler is designed as an attachment; it is generally recommended to replace the entire needle head assembly if significant wear occurs.
Verify that your air compressor is delivering a steady 90 PSI and that your airline is free of kinks or obstructions.
Ensure the coil spring chisel retainer is threaded correctly and tightened fully against the barrel housing.
Check the needle head for debris or rust accumulation; clean with a wire brush and apply pneumatic oil to the internal moving parts.
To operate the Voche Air Hammer, connect it to your air compressor system using a standard 1/4 inch air inlet fitting. Always ensure your compressor has an output of at least 4 CFM to maintain constant pressure. Before first use, apply a few drops of air tool oil into the air inlet to lubricate the internal piston. To switch tools, simply unthread the coil spring retainer, insert your chosen chisel, and securely tighten the spring back onto the barrel. After every use, wipe the exterior with a clean cloth and apply a light coat of oil to the black oxide finish on the needle de-scaler to prevent surface oxidation.
