Best current price£11.09from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£11.09Visit shop Makita 196205-9 Saw Chain Set Dcs230t/Buc250, Multi-Colour
Visit shop
eBay£19.00Visit shop MAKITA 1910V6-4 Chain 10cm / 1.1mm Gauge
Visit shop21 offers from £11.09 - £34.87
View price history by clicking the chart icon.
The Makita 191H10-7 is a genuine OEM replacement chainsaw chain designed for Makita compact chainsaws and pole saws utilizing a 30cm guide bar. It offers efficient cutting performance through its robust construction, hardened steel, and precision-engineered cutters, making it ideal for wood and soft timber. A key benefit is its optimized design, which reduces vibration and kickback for improved control and operator comfort. However, this chain is specifically designed for certain Makita models, so compatibility must be confirmed before purchase.
| Model Part Number | 191H10-7 |
|---|---|
| Brand | Makita |
This chain is designed for Makita chainsaws and pole saws that use a 30cm (12-inch) guide bar and require a 3/8" low-profile pitch, 1.3mm gauge chain with 46 drive links. Examples include the 40v Max XGT Top Handle Chainsaws UC002G, UC003G, and UC006G.
A dull chain will produce sawdust instead of fine wood chips, require more force to cut, and may cut erratically. You might also notice the chain is 'walking' or not cutting straight.
Pitch refers to the distance between drive links (e.g., 3/8"), and gauge refers to the thickness of the drive link (e.g., 1.3mm). Using the correct pitch and gauge is crucial for proper fit and performance.
It's recommended to check chain tension before each use and periodically during operation, especially when the chain is new or after prolonged use. Chains can stretch or tighten with temperature changes.
While theoretically possible if specifications match, it is strongly recommended to use genuine Makita chains on Makita saws for optimal performance, safety, and to maintain warranty. Always check your saw's manual for recommended chain specifications.
The Makita 191H10-7 chain has 46 drive links.
Regular maintenance includes sharpening the cutters, ensuring proper chain tension, adequate lubrication, and cleaning the chain and guide bar after each use.
Check if the chain is dull and needs sharpening. Ensure the chain is properly tensioned and adequately lubricated.
Adjust the chain tension using the saw's tensioning mechanism. A properly tensioned chain should be snug but still movable by hand with gloves on. It should not sag from the underside of the bar.
This usually indicates the chain is too loose or the guide bar is worn. Re-tension the chain, and inspect the guide bar for wear or damage. If worn, replace the guide bar.
Ensure the chain is sharp and properly tensioned. Check for any damage to the chain or guide bar. Some vibration is normal, but excessive amounts may indicate a problem.
Compatibility: This chain is designed for specific Makita chainsaws and pole saws that use a 30cm (12-inch) guide bar, such as the 40v Max XGT Top Handle Chainsaws (UC002G, UC003G, UC006G). Always verify that your chainsaw model is listed as compatible and that it uses a 3/8" low-profile pitch and 1.3mm gauge chain with 46 drive links.
Setup:
Care:
