Metcalfe PN936 Settle/Carlisle Goods Shed N Gauge Kit

This kit is designed for N gauge, which is a scale of 1:148.

The kit includes pre-printed and laser-cut card components for the building structure, windows, doors, and roof details.

The card is pre-printed with realistic colours and textures. However, painting or weathering can be done to add further realism or achieve a specific look.

A quality PVA glue or a dedicated model-making adhesive suitable for card and paper is recommended. Avoid overly wet glues that can warp the card.

Assembly time can vary greatly depending on your experience and the level of detail you wish to achieve. For a standard build, expect several hours spread over a few sessions.

Yes, after assembly, you can apply a light coat of matte varnish or use weathering powders to protect the card and enhance the realistic appearance.

No, tools such as a hobby knife, cutting mat, tweezers, and glue are not included and must be purchased separately.

Ensure all pieces have been cut cleanly from the sprue or sheet. Check for any excess material or small burrs. Adjust cuts as needed. Ensure you are using the correct parts for the step.

Use a suitable PVA or model-specific card adhesive. Ensure surfaces are clean and dry. Apply a thin, even layer of glue. Allow adequate drying time for each joint.

Avoid over-applying glue, especially on larger surfaces. Work in a stable environment with moderate humidity. Press pieces gently but firmly while glue sets. Consider reinforcing internal joints if significant warping occurs.

Handle delicate parts like window frames and bargeboards with tweezers. Apply glue sparingly to the edges of these components. Allow glue to fully cure before handling the assembled section.