Lineco Document Repair Tape - Transparent, 2.5cm x 30M

The adhesive is designed for long-term archival stability and is considered permanent in that it won't degrade or yellow. However, it is also designed to be reversible with specific solvents if needed for conservation purposes.

Yes, it can be used on photographic prints, especially those on paper-based mounts or with matte finishes. Test on a corner or similar area first, as glossy or coated surfaces might react differently, and avoid applying directly over the image emulsion if possible.

Burnishing means applying firm pressure with a smooth, hard tool like a bone folder. You should see the tape become flatter and more integrated with the paper. The adhesive should appear to be 'worked into' the paper fibers.

Lineco typically recommends solvents like ethanol or mineral spirits for removing their archival tapes. Always test solvents on a scrap piece of paper first to ensure compatibility and avoid damaging the document.

No, this tape is specifically formulated to be non-yellowing, making it suitable for archival applications where long-term visual integrity is important.

When stored properly in a cool, dry place away from direct sunlight, the adhesive typically remains effective for many years. However, it's best to use it within 2-3 years for optimal performance.

In most cases, yes. Once the tape is securely burnished, it provides a stable surface. However, test with your writing instrument and ink on a sample first, as very fine-tipped pens might catch on the tape edge if not perfectly smooth.

Ensure the paper surface is clean, dry, and free of dust or oils. Burnish more firmly using a bone folder or similar tool, applying even pressure to work the adhesive into the paper fibers.

Use a thinner layer of tape. Ensure the paper is smooth. Careful burnishing can help the tape integrate better with the paper surface. For very fine tears, consider using a narrower width of tape if available.

Use a sharp pair of scissors or a precision craft knife. Some users find a rotary cutter provides a cleaner edge on thin tapes.

Ensure you are using the correct solvent recommended for Lineco products and applying it cautiously. Test removal on a similar paper sample first. Complete removal may require multiple applications of solvent.