Bosch EXPERT HEX-9 Multi Construction TCT Drill Bit - 8 x 150mm

Yes, it can be used with a standard rotary drill driver. For concrete and stone, performance will be significantly better with the impact function engaged on a compatible drill.

The HEX-9 technology refers to the multi-material capability, sharp tip, and optimized carbide, designed for high performance across a diverse range of hard materials.

The centering geometry is a design feature on the tip of the drill bit that helps it stay in place on the material surface upon initial contact, preventing it from wandering and ensuring a precise starting point.

Yes, it is suitable for soft tile. For very hard tiles like porcelain, a specialized tile bit might be recommended for optimal results and longevity.

The drill bit is 150mm in length.

After use, clean the drill bit with a wire brush to remove any material residue. Store it in a dry place to prevent rust.

Yes, this bit is designed to drill into metal, as well as various other hard materials. Use it in rotary mode for best results.

Ensure the drill is set to 'Impact' mode. Verify the bit is securely fastened in the chuck and that you are applying adequate pressure.

Confirm the centering geometry is engaged properly at the start of the drilling process. Ensure the material is stable and properly supported.

Switch the drill to 'Rotary' mode (without impact). Consider using a lubricant or coolant for metal to reduce friction and heat buildup.

Cease use immediately. Inspect for chips or cracks. If damaged, the bit should be replaced to ensure safety and performance.