Sheet Metal Punch - Q.Max - 76.5mm
Best current price£120.65from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£120.65Visit shop B&Q - Qma-76.5M Sheet Metal Punch 76.5mm Qma765M
Visit shopB&Q£120.65Visit shop One Offer
1 offer from £120.65
View price history by clicking the chart icon.
Product Information
Full details
This Q.Max 76.5mm Sheet Metal Punch is designed for professionals and DIY enthusiasts who need to create clean, metric-sized holes in sheet metal up to 16 gauge quickly and efficiently. Its unique design ensures even load distribution during cutting, producing a burr-free result that requires no additional finishing, saving valuable time on projects. A key caveat is that the punch is sold separately from the necessary hexagonal key, which must be ordered independently.
All features
| Model Part Number | QMA-76.5M |
|---|---|
| Brand | Q.Max |
Extended Product Information
FAQs
What material thickness can this punch cut?
This punch is designed for sheet metal up to 16 gauge in thickness.
Is the hexagonal key included with the punch?
No, the hexagonal key required for operation is sold separately and must be ordered independently.
Do I need to finish the edges of the hole after cutting?
No, the special design of this punch produces a burr-free hole that typically requires no extra finishing.
How do I maintain the punch to prevent rust?
After use, clean the punch and die thoroughly, dry them completely, and apply a light coat of oil to the cutting edges and threads. Store in a dry place.
What is the difference in operation for punches larger than 15mm?
For punches 15mm and over, the configuration differs: the thread is typically integrated into the punch itself, and a die nut is not used in the same manner.
Can this punch be used for round pipes or thicker metals?
This punch is specifically designed for flat sheet metal up to 16 gauge. It is not intended for pipes or metals beyond its specified thickness capacity.
What does 'metric sized holes' mean in the description?
It refers to the hole diameter being measured and specified in millimeters (e.g., 76.5mm), as opposed to imperial measurements (inches).
Troubleshooting
Punch is difficult to turn or doesn't cut cleanly.
Ensure the sheet metal is within the 16 gauge limit. Check for debris on the cutting edges or threads. Ensure the hexagonal screw and die nut are properly aligned and tightened before operation.
Hole is not perfectly round or has significant burrs.
Verify that the correct punch size is being used. Ensure the punch and die are clean and free from damage. For optimal results, ensure the punch is perpendicular to the sheet metal during cutting.
Hexagonal screw threads are stripped or damaged.
Avoid overtightening. Ensure the die nut threads are clean and free from debris before screwing it onto the hexagonal screw. Inspect the screw for any visible damage before use.
Tool is showing signs of rust.
Clean the tool thoroughly and dry it completely. Apply a light coat of machine oil or anti-corrosive spray to all metal surfaces, paying attention to cutting edges and threads.
Pros and Cons
Pros
- Produces clean, burr-free holes requiring no finishing.
- Efficiently cuts metric sized holes in sheet metal up to 16 gauge.
- Durable construction with heat-treated cutting edges.
- Anti-corrosive finish enhances tool longevity.
- Designed for even load distribution, ensuring consistent performance.
Cons
- Hexagonal key required for operation must be purchased separately.
- Instructions provided are for cutters up to 15mm; larger sizes have a different configuration.
- Not designed for use on materials thicker than 16 gauge sheet metal.
- Separate ordering of punch and key can be an inconvenience.
Setup, Compatibility & Care
Setup:
- Thread the punch onto the hexagonal screw.
- Pass the hexagonal screw through the desired hole location on the sheet metal.
- Position the die on top of the die nut.
- Screw the die nut onto the projecting hexagonal screw until it makes contact with the metal sheet.
- Use a hexagonal key (ordered separately) to turn the hexagonal screw. The screw will pull the punch through the metal, creating the hole.
*Note: This procedure applies to cutters up to 15mm. Larger cutters (15mm and over) have a different configuration, where the thread is in the punch itself, and no die nut is used.*
Compatibility:
- Designed for sheet metal up to 16 gauge thickness.
- Requires a hexagonal key (sold separately) for operation.
Care:
- Clean the punch and die after each use to remove metal debris.
- Apply a light coating of oil to the cutting edges and threads to prevent rust, especially during storage.
- Store in a dry environment.
- The black anti-corrosive surface finish helps prevent rusting; maintain this by keeping the tool clean and dry.