Best current price£22.77from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£22.77Visit shop F Clamps Bar Clamp Heavy Duty 150 X 50Mm 6" Long Quick Slide Wood Clamp 4Pc Set 5060451290837
Visit shop1 offer from £22.77
View price history by clicking the chart icon.
This guide is for woodworkers, DIY enthusiasts, and anyone needing a reliable way to hold materials during assembly or finishing. The Toolzone F Clamps offer a secure and adjustable grip for heavy-duty tasks, ensuring your workpiece stays firmly in place. A minor consideration is their weight for prolonged overhead use.
| Model Part Number | KDPCL098 |
|---|---|
| Brand | Toolzone |
These F clamps, also known as bar clamps, are primarily used in woodworking and DIY projects to hold pieces of material together securely while they are being cut, glued, or assembled. They provide firm, consistent pressure.
While specific weight ratings aren't provided, these are classified as 'heavy-duty' and are designed to provide significant clamping force suitable for most woodworking and assembly tasks.
The clamps have a 6-inch (approximately 150mm) length capacity for gripping material.
Yes, the protective non-marking covers are designed to be used with the clamps and are typically replaceable if they become lost or damaged.
This refers to the distance from the edge of the clamp's fixed jaw to the center of the bar. It indicates the reach of the clamp onto the surface of your workpiece.
While they provide strong clamping force, they are primarily designed for woodworking. For heavy metal fabrication, specialized metal clamps might be more suitable depending on the required forces and heat resistance.
Wipe them down with a dry cloth after use. For tougher residue, use a slightly damp cloth and dry thoroughly. Ensure the sliding mechanism remains free of debris.
Ensure the bar and sliding jaw are clean and free from dust, wood chips, or dried glue. Apply a small amount of lubricant like WD-40 or silicone spray to the bar and work the jaw back and forth.
Check for any obstructions or debris around the screw mechanism. If the handle feels stripped, it may indicate wear and the clamp might need replacement.
Contact the manufacturer or a hardware supplier for replacement covers. If unavailable, ensure you use a separate protective material like thick cardboard or felt to prevent workpiece damage.
Verify that the screw mechanism is fully engaged and tightened. Ensure there is no debris preventing the jaw from seating properly against the workpiece. If the issue persists, the internal threading may be worn.
Setup: These F clamps are ready to use straight out of the packaging. To adjust the clamp, slide the movable jaw along the bar to the desired opening. Then, tighten the handle to apply pressure. To release, simply turn the handle counter-clockwise.
Compatibility: Compatible with most standard woodworking materials including wood, MDF, particle board, and some plastics. They are suitable for use with glues, screws, and other fasteners commonly used in assembly.
Care: Keep the sliding mechanism clean and free of debris for smooth operation. Wipe down the bar and jaws with a dry cloth after use. For stubborn residue, use a slightly damp cloth and ensure the clamps are dried thoroughly. Avoid exposing the clamps to excessive moisture or corrosive materials to prevent rust and damage to the handles and protective covers.
