Driver Cab Tilt Cylinder - Febi - 33031

This cylinder provides the hydraulic power to lift and lower the driver's cab on specific Mercedes Benz LKW models, allowing access to the engine compartment for maintenance.

The most reliable method is to use your vehicle's VIN (Vehicle Identification Number) to check compatibility through automotive parts databases or by consulting a mechanic. You can also compare the OE numbers listed with your current part.

Yes, the Febi 33031 is designed as an original febi bilstein spare part, intended to directly replace the OE Mercedes Benz LKW part number 001 553 35 05 and other compatible OEM numbers.

The cylinder has a length of 659 mm (or 890 mm depending on configuration), a width of 87 mm, a height/thickness of 42 mm, and an outside thread of M12 x 1,5. The lifting length is 231 mm.

The approximate weight of this driver cab tilt cylinder is 4.00 kg.

Typically, installation hardware is not included and should be reused from the original part or sourced separately, depending on the condition of existing hardware.

This component is manufactured under the "Made in Germany" quality standard by Febi Bilstein.

Check for hydraulic fluid leaks around the cylinder seals or connections. The system may need to be refilled or bled. Ensure no obstructions are preventing full movement.

Inspect the cylinder rod and seals for damage. If leaks are present, the cylinder likely needs replacement.

Ensure you have the correct cylinder for your vehicle model and that the cab is in the fully lowered position. Minor adjustments to mounting brackets may be necessary.

This could indicate air in the hydraulic system or wear within the cylinder. Bleeding the system might resolve it; otherwise, the cylinder may require replacement.