Rust-Oleum Furniture Paint - Flint Matt
Best current price£5.50from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£5.50Visit shop B&Q - Flint Matt Multi-Room Furniture Paint125Ml
Visit shopB&Q£5.50Visit shop All Offers
3 offers from £5.50 - £20.00
View price history by clicking the chart icon.
B&Q - Flint Matt Multi-Room Furniture Paint750MlFree delivery in 1–3 days£20.00Visit shop →
Robert DyasRust-Oleum Furniture Paint - Flint Grey - 750ml - Matt Finish - Water-Based
£2.95 delivery
£19.99
Visit shop
Product Information
Full details
This Rust-Oleum Furniture Paint in Flint Matt is designed for DIY enthusiasts looking to refresh interior furniture, doors, and trims with a durable, matt finish. Its key benefit is its 3-in-1 functionality – acting as a paint, primer, and sealer, saving time and effort. A minor caveat is that it is water-based with trace VOCs, so ensure good ventilation during application.
All features
| Colour | Grey |
|---|---|
| Model Part Number | RO0410016G1 |
| Brand | Rust-Oleum |
Extended Product Information
FAQs
Can I use this paint on outdoor furniture?
No, this paint is specifically designed for interior use only and is not formulated to withstand exterior weather conditions.
Do I need to use a separate primer?
No, this product acts as a paint, primer, and sealer in one, eliminating the need for a separate primer on most surfaces.
How long does it take for the paint to fully cure?
The paint will be touch dry within 1-2 hours, but it takes approximately 7 days to fully cure and achieve its maximum hardness and washability.
What is the best way to clean up application tools?
Clean brushes, rollers, and sprayers immediately after use with soap and water.
Is this paint safe for children's furniture?
Yes, it is certified Toy Safe to EN71-3: 2019+A1:2021 standards, making it suitable for use on furniture that children will interact with.
Can I paint over existing varnish or paint?
Yes, on most surfaces including wood with existing finishes. For glossy surfaces, light sanding to 'key' the surface is recommended for optimal adhesion.
What surfaces can this paint be used on?
It can be used on interior brick, metal, plaster, plastic, stone, and wood.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly cleaned and prepared. Glossy surfaces may need light sanding. Check that the paint was stirred thoroughly.
Uneven finish or brush marks visible
Apply paint in thin, even coats. Use a high-quality brush or roller and maintain consistent application direction. Allow adequate drying time between coats.
Paint is too thick to apply
Stir the paint thoroughly. If still too thick for spraying, you may add a very small amount of water (follow manufacturer guidelines for dilution). Ensure application conditions are not too cold.
Surface remains tacky after drying
Ensure adequate ventilation during application and drying. Check the ambient temperature and humidity, as high humidity or low temperatures can slow curing. Apply thinner coats if possible.
Pros and Cons
Pros
- Saves time and money with its 3-in-1 primer, paint, and sealer formula.
- Provides a tough, washable, and water-resistant finish.
- Suitable for a wide range of interior surfaces.
- Certified Toy Safe for peace of mind.
- Easy to apply with common tools like brushes or rollers.
Cons
- Requires good ventilation due to trace VOCs.
- The matt finish may show brush strokes if not applied carefully.
- Not suitable for exterior use.
- Drying times can vary based on humidity and temperature.
Setup, Compatibility & Care
Setup: Ensure the surface is clean, dry, and free from dust, grease, or wax. For glossy surfaces, a light sanding may be required. Stir the paint thoroughly before application.
Compatibility: This paint is suitable for interior brick, metal, plaster, plastic, stone, and wood. It is not recommended for exterior surfaces or areas with prolonged water immersion.
Application: Apply using a good quality brush, roller, or sprayer. For best results, apply two thin coats. Allow adequate drying time between coats (typically 1-2 hours, but can vary). The surface will be hard-wearing and washable once fully cured (usually 7 days).
Care: Clean application tools immediately after use with water. For the painted surface, clean gently with a damp cloth and mild soap if necessary. Avoid abrasive cleaners.