Best current price£7.00from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£7.00Visit shop Lieber Black Nickel 10A 4 Gang 2 Way Switch - Insert Screwless - Size: 146Mm X 86Mm X 2 Mm
Visit shop1 offer from £7.00
View price history by clicking the chart icon.
This Lieber Black Nickel 4 Gang 2 Way Switch is designed for homeowners seeking a stylish and functional lighting control solution, offering the convenience of controlling lights from two locations with a modern aesthetic. Its key benefit lies in its dual switching capability and elegant black nickel finish. A potential consideration is its specific 10A rating, which should be matched to your lighting circuit requirements.
| Colour | Black |
|---|---|
| Model Part Number | SS-LL-40-LTS104-BNB |
| Brand | LIEBER |
A 2-way switch allows a light or lighting circuit to be controlled from two different locations. This is achieved by using two 2-way switches wired together.
While this is a 2-way switch, it is typically used in pairs for 2-way control. It can be wired as a simple on/off switch (1-way), but this would not utilize its full potential.
Each of the four gangs on this switch is rated for 10 Amperes (10A). Ensure your lighting circuit does not exceed this rating.
Wipe with a soft, damp cloth. Avoid abrasive cleaners. For tougher marks, use a mild, diluted detergent and dry immediately with a clean cloth.
The screwless design provides a cleaner aesthetic. While installation requires careful alignment of the cover plate onto the mounting grid, it is straightforward when following standard wiring procedures.
This switch is suitable for controlling most types of domestic lighting, including incandescent, halogen, and LED bulbs, provided the total load per gang does not exceed 10A.
No, this switch is designed for indoor use only. It does not have the necessary Ingress Protection (IP) rating for outdoor environments.
Ensure power is supplied to the circuit. Verify that the switch is correctly wired as a 2-way switch with its paired switch. Check that the bulb is functional.
Check that the internal mounting frame is securely fixed to the wall box and that the screwless cover plate is correctly clipped into place.
Re-check the wiring configuration. Incorrect wiring can cause unintended circuits to be activated. Consult a qualified electrician.
Ensure no obstructions are around the switch mechanism. If the issue persists, the internal mechanism may be faulty, and the switch may need replacement.
Setup:
This is a 2-way switch, meaning it is designed to work in conjunction with another 2-way switch to control a single light or group of lights from two different locations. Installation should be performed by a qualified electrician to ensure safety and compliance with electrical regulations. The screwless plate design requires careful alignment during fitting.
Compatibility:
Care:
