Best current price£181.94from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£181.94Visit shop Nocry 20V Cordless Impact Wrench - 300 Ft-Lb (400 Nm) Torque, 2700 Max Ipm, 2200 Rpm, 1/2 Inch Anvil; 4.0 Ah Battery, Fast Charger, Belt Clip & 4744452016023
Visit shop1 offer from £181.94
View price history by clicking the chart icon.
The NoCry Cordless Impact Wrench is designed for DIY enthusiasts and professionals needing to tackle stubborn lug nuts, bolts, and large screws. Its key benefit is delivering powerful torque (400 Nm for loosening, 350 Nm for tightening) in a portable, cordless package, comparable to pneumatic tools. A potential caveat is the 2-hour charge time for its 20V battery, which may require planning for extended use. This tool features a 20V 4.0 Ah battery, a fast charger, a belt clip, and a carrying case, making it a complete solution for automotive repairs, construction, and heavy equipment maintenance.
| Model Part Number | NC-IW-400NM |
|---|---|
| Brand | NoCry |
The wrench provides 400 Nm of torque for loosening fasteners and 350 Nm for tightening.
The included 20V 4.0 Ah battery charges fully in approximately 2 hours with the fast charger.
It features a 1/2-inch detent anvil, which is a standard size for most impact sockets.
Yes, the 20V battery and charger are compatible with other NoCry 20V power tools.
The package includes the cordless impact wrench, one 20V 4.0 Ah battery, a fast charger, a belt clip, and a carrying case.
It is suitable for tire removal from cars, commercial vehicles, motorcycles, lorries, and vans.
The NoCry impact wrench comes with a 1-year limited warranty and a 30-day satisfaction guarantee.
Ensure the battery is fully charged and properly seated in the tool. Check if the battery contacts are clean. If the issue persists, try a different fully charged battery if available.
The battery may be low on charge; recharge it fully. Check the socket and anvil for any obstructions or damage. Ensure the socket is fully seated on the anvil.
Verify the charger is properly plugged into a working power outlet. Ensure the battery is correctly connected to the charger. Clean the battery and charger contacts. If the battery is old, it may no longer hold a charge.
This can sometimes indicate internal wear or a need for lubrication. Ensure you are using the correct size socket and that it is properly seated. If the problem is severe or persists, contact customer support.
Setup: To begin, ensure the 20V 4.0 Ah battery is fully charged using the included NoCry fast charger. The charger connects to a standard 220-240V, 50 Hz power outlet and typically takes 2 hours for a full charge. Once charged, insert the battery into the tool's base until it clicks into place. Attach the desired socket to the 1/2-inch detent anvil. For convenience, the belt clip can be attached to the tool's body.
Compatibility: The 20V battery and charger are compatible with other NoCry 20V power tools, allowing for system integration. The 1/2-inch anvil is a standard size, compatible with most common impact sockets.
Care: Keep the tool clean by wiping it with a dry or slightly damp cloth after use. Avoid exposing the tool, battery, or charger to extreme temperatures or moisture. Store the impact wrench, battery, and accessories in the provided carrying case to protect them from dust and damage. Ensure the battery contacts are clean and free of debris.
