Bosch UniversalGrind 750-115 Corded Angle Grinder - 750W 115mm

Always wear safety glasses, gloves, and a dust mask. Ensure the material being worked on is securely clamped. Never operate the grinder near flammable materials.

Press the spindle lock button to prevent the spindle from rotating. Use the appropriate wrench (if required) to loosen the disc nut, then replace the disc and tighten the nut.

This grinder is compatible with 115mm discs and accessories designed for angle grinders, including cutting discs, grinding discs, wire brushes, and sanding discs. Always check the accessory's specifications for compatibility.

The UniversalGrind 750-115 features a quick-adjust guard. Simply loosen the guard adjustment lever, position the guard to the desired angle, and tighten the lever. Ensure the guard provides adequate protection.

While the tool itself isn't designed for wet operation, when cutting materials like stone or concrete, use appropriate cutting discs and water to minimize dust and heat. Ensure the tool does not come into direct contact with water.

The Bosch UniversalGrind 750-115 typically comes with a standard warranty. Refer to your purchase documentation or contact Bosch customer service for specific warranty details.

After use, wipe down the grinder with a dry cloth. Do not use liquids or solvents to clean the tool. Keep the air vents clear of dust and debris.

Check the power connection and the power outlet. Ensure the power switch is in the 'on' position. Also, check the fuse in the plug.

Ensure the disc or accessory is properly secured. Check for any damage to the disc or accessory. Replace if necessary. Make sure you are using the correct disc type for the material you are working on.

Check the type of disc being used for the application. Ensure you are not applying too much pressure while grinding/cutting. Try a different disc specifically designed for the material.