Best current price£36.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£36.00Visit shop National Skirting White Groove I Primed Skirting Board 18Mm 220 X 3040Mm
Visit shop
B&Q£37.13Visit shop - National Skirting Groove I Mdf Skirting Board220mm X 18mm X 3040mmPrimedNo Rebate
Visit shop4 offers from £36.00 - £37.13
View price history by clicking the chart icon.
The National Skirting Groove I MDF Skirting Board in White is designed for homeowners and renovators seeking a distinctive and elegant finish for their interior spaces. Its key benefit lies in its unique design, featuring both inward and outer curves that offer a sophisticated contrast, enhancing both modern and traditional decors. A minor caveat is that the product arrives primed, requiring a top coat of paint or gloss for full protection and desired aesthetic.
| Colour | White |
|---|---|
| Series | Groove I |
| Brand | National Skirting |
The dimensions are 18mm thick, 220mm high, and 3040mm long.
No, it comes with a pristine white primer finish and is ready for you to apply your desired paint or gloss.
While it can be used, MDF is susceptible to moisture. It is recommended to apply a high-quality, moisture-resistant paint or sealant to the entire board, especially if installed in humid environments like bathrooms or kitchens.
Essential tools include a tape measure, pencil, fine-toothed saw (preferably mitre saw), spirit level, adhesive (e.g., grab adhesive), and a hammer with finishing nails or pins. A caulking gun may also be useful for applying adhesive.
Clean with a soft, damp cloth. Avoid abrasive cleaners or excessive moisture. Regular dusting and occasional wiping with a damp cloth are sufficient.
Ensure the surface is clean and smooth after filling nail holes. Apply a primer if needed, and then use multiple thin coats of your chosen paint, allowing sufficient drying time between coats. Lightly sanding between coats can also help achieve a smoother finish.
Yes, this skirting board is designed to cover the expansion gap between walls and various types of flooring, including laminate, hardwood, carpet, and tile.
Use a sharp, fine-toothed saw, preferably a mitre saw or a hand saw designed for fine cuts. Ensure the board is securely clamped before cutting.
Ensure the wall surface is clean, dry, and free of dust or grease. Apply a sufficient amount of high-quality adhesive and use temporary fixings (like tape or nails) until the adhesive cures fully.
Ensure the MDF is properly primed and that any filler used is completely dry and sanded smooth. Apply multiple thin coats of paint, allowing adequate drying time between each coat.
Properly seal all edges and the surface with paint or gloss. Avoid installing in areas with high humidity or direct water exposure unless specifically protected with a moisture-resistant finish.
Setup:
Compatibility:
This MDF skirting board is compatible with most standard wall surfaces, including plaster, plasterboard, and existing painted walls. Ensure the wall surface is clean, dry, and free from loose material before application.
Care:
Clean with a soft, damp cloth. Avoid using abrasive cleaners or excessive moisture, as this can damage the MDF. For deeper cleaning, use a mild detergent diluted in water, and wipe dry immediately. If the surface becomes scuffed, touch-up painting can easily restore its appearance.
