Best current price£56.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£56.00Visit shop B&Q - Woodworks White Quick Dry Opaque Wood Finish Satin2.5L
Visit shop1 offer from £56.00
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professional painters seeking a durable and fast-drying wood finish. The key benefit is significantly reduced project time due to its quick-drying and self-priming properties, allowing for recoats in just two hours. A potential caveat is its opaque nature, which covers wood grain rather than enhancing it. This finish provides long-lasting protection against the elements with a subtle satin sheen, suitable for various wood surfaces.
| Colour | White |
|---|---|
| Model Part Number | 301852 |
| Brand | Johnstone's Trade |
Yes, this finish can be applied over previously painted or primed surfaces. For glossy varnished surfaces, it is recommended to lightly sand the area to ensure good adhesion.
A second coat can typically be applied after 2 hours, depending on temperature and humidity levels.
Yes, it is designed to adhere well to bare wood surfaces and acts as its own primer.
It provides an opaque satin finish, which offers a subtle sheen without being glossy.
Yes, it offers long-lasting protection against the elements and is suitable for exterior wood applications.
Clean application tools immediately after use with water.
This product variant is White.
Stir the product thoroughly. If necessary, a small amount of water (up to 10% by volume) can be added for easier application, especially in dry conditions. Ensure ambient temperature is suitable for application.
Apply the product evenly with consistent brush strokes, working in one direction. Avoid overworking the paint. Ensure adequate lighting during application. For best results, use a high-quality brush or roller.
Ensure the surface was properly prepared (clean, dry, free from contaminants) and that the product was applied to a sound, non-glossy surface or a suitable primer. Check that the surface was not exposed to moisture too soon after application.
Drying times are dependent on temperature, humidity, and film thickness. High humidity or low temperatures can significantly increase drying and recoating times. Ensure good ventilation.
Setup:
Compatibility:
Care:
