Best current price£57.30from eBay
Shopping.co.uk recommended and popular offers
eBay£57.30Visit shop Connect Assorted Ford Oxygen Sensor Electrical Connector Kit 18pc 37411
Visit shop5 offers from £57.30 - £73.59
View price history by clicking the chart icon.
This Connect Assorted Ford Oxygen Sensor Electrical Connector Kit is designed for automotive electrical engineers and technicians needing to repair or replace sensor harnesses on Ford vehicles. Its key benefit is providing a comprehensive set of color-coded, keyed connectors to ensure correct and weatherproof connections, minimizing guesswork and potential errors. A potential caveat is that it specifically targets Ford applications and may not be universally compatible with other makes.
| Model Part Number | 37411 |
|---|---|
| Brand | Connect |
This kit includes connectors specifically for Ford oxygen sensors and knock sensors. There are three types of connectors for each sensor category.
Yes, each kit includes the correct quantity of non-insulated terminals and rubber 4-pin seals for all the connectors provided.
While the connector types might resemble others, this kit is specifically designed and keyed for Ford vehicles. Compatibility with other makes is not guaranteed.
The connectors are color-coded (grey, green, black) for easy identification, corresponding to different sensor types or positions on Ford vehicles. Consult your vehicle's service manual if unsure.
You will typically need a wire stripper, a crimping tool for the terminals, and potentially a small tool to assist in seating wires into the connector housings.
The kit contains three pieces of each of the six different connector types, totaling 18 pieces.
The connector housings can sometimes be carefully disassembled, but repeated disassembly may compromise the seals or housing integrity. It's best to aim for a correct installation on the first attempt.
Ensure wires are correctly seated in their respective positions and that the rubber seals are not obstructing the closure. Verify that the correct terminals are used and properly crimped.
Double-check that the rubber seals are correctly installed around each wire before inserting into the housing. Ensure the connector halves are fully seated together.
Refer to the color-coding and unique housing configurations of each connector in the kit. Compare these directly with the original connector on the vehicle's harness and the sensor.
The terminal may not have been crimped securely. Re-crimp the terminal using appropriate tools or replace the terminal and attempt the connection again.
Setup: This kit contains replacement connectors. To use, carefully remove the damaged connector from the vehicle's wiring harness. Identify the correct replacement connector from the kit based on the vehicle's existing wiring and sensor type (refer to color-coding and housing configuration). Crimp the provided non-insulated terminals onto the stripped ends of the vehicle's harness wires. Insert the wires with terminals into the corresponding positions within the new connector housing. Ensure the rubber seals are correctly seated around the wires before inserting them into the housing to maintain a weatherproof seal. Once the connector is assembled, plug it into the corresponding sensor.
Compatibility: This kit is specifically designed for various Ford vehicle models that utilize the listed oxygen and knock sensor connector types. It is crucial to verify that the connector types and pin configurations match the original connectors on the vehicle before installation. While the kit contains 3 types of knock sensor connectors and 3 types of oxygen sensor connectors, it is not guaranteed to fit all Ford vehicles or any non-Ford vehicles.
Care: Store the kit in a clean, dry environment to prevent corrosion or damage to the components. Keep the blister pack sealed when not in use. Inspect connectors for any damage before installation. Ensure all connections are properly crimped and sealed to maintain their integrity and weatherproof capabilities.
