Pivoting Double Shower Glass or Panel Seal - BIF040
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to seal gaps between glass panels in bi-fold or corner pivot shower doors. The key benefit is creating a watertight seal to prevent leaks. A potential caveat is that this seal is designed for specific door types and glass thicknesses. The Shower Seal UK BIF040 is a pivoting seal used to bridge the gap between two pieces of glass in shower enclosures, available in 1000mm or 2000mm lengths.
All features
| Model Part Number | BIF040 |
|---|---|
| Brand | Shower Seal UK |
Extended Product Information
FAQs
What type of shower doors is this seal for?
This seal is specifically designed for bi-fold and corner pivot shower doors where two pieces of glass meet.
What is the maximum gap this seal can bridge?
The product description indicates it's used to 'bridge the gap between 2 pieces of glass'. While a specific measurement isn't provided, it's designed for the standard meeting point of these door types. Refer to sibling product 'BIF040-9' which specifies it fits 8-10mm glass and is a double seal, suggesting its primary function is to join panels of that thickness.
Can I use this seal for a straight glass-to-wall connection?
No, this seal is designed for joining two pieces of glass, not for sealing a glass panel against a wall.
What lengths is the BIF040 seal available in?
The BIF040 seal is available in lengths of 1000mm and 2000mm.
How do I cut the seal to size?
You can cut the seal to the required length using a sharp utility knife or strong scissors.
What is the best way to clean the seal?
Clean the seal regularly with a soft cloth and a mild, non-abrasive bathroom cleaner. Avoid harsh chemicals.
What is the thickness of the glass this seal is designed for?
Based on related product information (MPN BIF040-9), this seal is designed to fit 8mm to 10mm glass.
Troubleshooting
Seal is not creating a watertight barrier.
Ensure the seal is fully seated on the glass edge. Check if the glass thickness is within the 8-10mm range. Verify that the seal is the correct type for the gap between the glass panels and that it is not damaged.
Seal is difficult to slide onto the glass.
Clean the edge of the glass thoroughly. Slightly dampen the edge of the glass or the seal with water (avoid soap unless specifically recommended for cleaning). Ensure you are using the correct seal for the specified glass thickness.
Seal is loose or falling off.
The seal may not be fully engaged. Push it firmly onto the glass edge. If the glass is thinner than specified, a tighter fitting seal might be needed, or a small amount of clear silicone sealant could be used *sparingly* on the inside to secure it (use with caution and test first).
Pros and Cons
Pros
- Effectively seals gaps between two glass panels.
- Suitable for bi-fold and corner pivot shower doors.
- Available in two convenient lengths.
- Helps maintain a dry bathroom environment by preventing leaks.
- Discreet clear design.
Cons
- Only suitable for specific shower door types (bi-fold and pivot).
- Designed for a specific glass thickness range (8-10mm as per sibling data).
- May require precise cutting for exact fit.
- Not intended for straight glass-to-wall seals.
Setup, Compatibility & Care
Setup:
- Measure the length of the glass edge where the seal is to be applied.
- Cut the seal to the required length using a sharp utility knife or shears.
- Clean the glass edge thoroughly to remove any soap scum or residue.
- Slide the seal onto the edge of one glass panel. The seal's profile is designed to grip the glass securely. For double seals, apply to both relevant glass edges before closing the door.
Compatibility:
- This seal is primarily designed for bi-fold and corner pivot shower doors.
- It is suitable for glass panels with a thickness of 8mm to 10mm.
- Ensure the gap between the two glass panels is within the seal's bridging capacity.
Care:
- Clean regularly with a mild, non-abrasive bathroom cleaner and a soft cloth.
- Avoid using harsh chemicals or abrasive pads, which can damage the seal's material or finish.
- Periodically check the seal for any signs of wear or damage and replace if necessary.