Shopping.co.uk

Warmer Underfloor Heating Manifold - 2 Ports - Stainless Steel - 15mm Pipe Connections - 1 Inch Ball Valves

Warmer Underfloor Heating Manifold - 2 Ports - Stainless Steel - 15mm Pipe Connections - 1 Inch Ball Valves

PSW TRADESUPPLIERS LTD offers high quality products. Underfloor heating manifolds are able to cont...

Best current price£76.23from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£76.23Visit shop

B&Q - 2 Ports Stainless Steel Ufh Manifold With Copper 15mm Eurocone1 Inch Ball ValvesAutomatic Air Vent Psw Tradesuppliers Ltd

Visit shop

All Offers

7 offers from £76.23

View price history by clicking the chart icon.

B&QB&Q - 2 Ports Stainless Steel Ufh Manifold With Copper 15mm Eurocone1 Inch Ball ValvesAutomatic Air Vent Psw Tradesuppliers Ltd
Free delivery in 1–3 days
£76.23
Visit shop

Product Information

Full details

The Wärmer System Underfloor Heating Manifold is designed for efficient heat distribution in underfloor heating (UFH) systems, ideal for small to medium installations. It allows precise control over multiple zones, enabling each area to be heated to a different temperature, ensuring balanced water flow and consistent comfort. While offering durable construction and user-friendly features like a pressure gauge and air vent, users must select the correct Eurocone size for their specific pipe type during purchase.

All features

Model Part NumberE160
BrandWärmer System

Extended Product Information

FAQs

What is the main benefit of using an underfloor heating manifold?

A manifold allows you to control multiple heating zones independently, ensuring each area can be set to a different temperature for optimized comfort and energy efficiency.

What does the pressure gauge do?

The pressure gauge allows you to monitor the water pressure within the underfloor heating system, ensuring it operates within the safe and efficient range.

How do I select the correct Eurocone size?

You need to match the Eurocone size to the outer diameter of your underfloor heating pipe. Common sizes include 12mm, 16mm, and 17mm. Check your pipe specifications or consult your installer.

Do I need to buy anything else to make this manifold work?

Yes, you will need to purchase actuators for thermostatic zone control and a compatible control system (e.g., a room thermostat for each zone). Pipes and fittings to connect to your heat source are also required.

Can this manifold be used for larger heating systems?

This is a 2-port manifold, ideal for smaller to medium-sized installations. For larger areas, you may need multiple manifolds or a larger system designed for such applications.

How often should I check the system pressure?

It's recommended to check the system pressure periodically, especially after initial installation or any maintenance. The pressure gauge provides continuous monitoring.

Troubleshooting

Uneven heating across zones

Check and adjust the flow meters on each loop to ensure balanced water distribution. Ensure no air is trapped in the system by using the air vent.

Manifold is leaking

Inspect all connections, especially the pipe fittings and valve seals. Tighten connections carefully or replace seals if damaged.

System pressure is too low or too high

Refer to your UFH system's manual for correct operating pressure. Adjust pressure using the filling/drain off valve as needed.

No heat in one zone

Verify that the corresponding pipe loop is properly connected and that the actuator (if installed) is open. Check for blockages in the loop.

Pros and Cons

Pros

  • Durable and corrosion-resistant stainless steel build.
  • Enables individual temperature control for multiple heating zones.
  • Includes essential monitoring tools like a pressure gauge and flow meters.
  • Automatic air vent simplifies system maintenance and improves efficiency.
  • Easy to install, suitable for both professionals and DIY users.
  • Available with different Eurocone sizes to match various pipe types.

Cons

  • Manifold has a fixed number of ports (2 ports), limiting scalability for very large areas without multiple units.
  • Requires careful selection of the correct Eurocone size during purchase.
  • Does not include actuators or thermostats, which must be purchased separately.
  • Primarily suited for small to medium installations.

Setup, Compatibility & Care

Setup:

  1. Mount the Manifold: Securely fix the manifold to a wall or mounting bracket in a suitable location, typically near the heat source.
  2. Connect UFH Pipes: Attach the underfloor heating pipes to the manifold's ports using the appropriate fittings (ensure correct Eurocone size is selected).
  3. Connect to Heat Source: Connect the supply and return lines from your boiler or heat pump to the manifold's inlet and outlet valves.
  4. Fill and Vent System: Fill the system with water, bleed air using the automatic air vent and manual bleed valve, and check for leaks.
  5. Install Actuators (if applicable): If using thermostatic control, install the required actuators on the manifold returns.

Compatibility:

  • This manifold is designed for hydronic (water-based) underfloor heating systems.
  • Ensure the Eurocone connectors (e.g., 15mm) match your UFH pipe diameter.
  • Compatible with standard UFH control systems (thermostats, actuators - sold separately).

Care:

  • Regularly check the pressure gauge to ensure it is within the recommended operating range.
  • Periodically inspect for any signs of leaks around connections.
  • Open the manual air vent briefly if air is suspected in the system.
  • Wipe the exterior with a dry or slightly damp cloth. Avoid abrasive cleaners.

Price History

DatePrice
Visit shop