Einhell Sliding Mitre Saw - 1800W - 216mm

Use the spindle lock to secure the blade. Then, use the provided tool to loosen and remove the blade. Install the new blade, ensuring it's facing the correct direction, and tighten the retaining nut securely.

Always wear safety glasses and hearing protection. Use the appropriate blade for the material. Ensure the workpiece is securely clamped. Do not reach across the blade while it's running.

The maximum cutting width is 305mm and the cutting depth is 65mm.

This saw is designed for wood and wood-like materials. Using it on metal could be dangerous and damage the saw.

Loosen the miter adjustment lever, set the desired angle using the scale, and then tighten the lever to lock the angle in place. The saw head can be tilted up to 45 degrees to the left and right.

Use a brush or compressed air to remove sawdust from the saw. Wipe down the surfaces with a damp cloth, do not use solvents. Clean the chip collector regularly.

The saw uses a 216mm tungsten carbide-tipped (TCT) blade with 48 teeth.

Replacement parts can often be found through the manufacturer's website or authorized dealers.

Check the power connection and ensure the saw is plugged into a working 240V outlet. Check the power switch and reset if necessary.

Ensure the blade is sharp and properly installed. Check the angle settings and ensure they are locked securely. Verify the laser guide is correctly aligned.

Check if the blade is properly mounted, tighten all bolts and screws. Make sure the workpiece is clamped securely before cutting.

Check the chip collector and empty it. Ensure the dust extraction port is connected to a vacuum cleaner with a 36mm hose.