Best current price£201.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£201.49Visit shop B&Q - Linear Wet Room Tile On Shower Trays- Stainless Steel Alternative SlotsSize: 800 X 800 X 25mm
Visit shop9 offers from £201.49 - £275.99
View price history by clicking the chart icon.
The INSL8 Linear Wetroom Shower Tray is designed for DIY enthusiasts and professional installers seeking a durable, waterproof, and easy-to-install base for tiled wetroom showers. Its key benefit is creating a cost-effective, insulated substrate that ensures efficient drainage with its built-in 2% fall. A caveat is the limitation on trimming; you can only cut up to 50mm from each side.
| Model Part Number | ISF0808LIN30_STAG |
|---|---|
| Brand | INSL8 |
It is constructed from XPS (extruded Polystyrene) with a cement coating, creating an insulated and waterproof substrate.
Yes, you can trim the tray using a standard blade or saw. You are limited to cutting a maximum of 50mm off of each side, with equal amounts removed from opposite sides.
The 2% fall is a built-in slope that ensures water efficiently drains towards the linear drain, preventing water from pooling on the shower floor.
You should use a flexible tile adhesive to fix the tray directly onto a solid concrete or reinforced wood sub-floor.
Yes, the INSL8 shower tray is designed to be 100% waterproof, providing reliable protection against moisture.
This specific guide is for the INSL8 Linear Wet Room Shower Tray - 800 x 800 x 30mm with Staggered Slots. Other sizes and grate options may be available.
Yes, but only if the timber sub-floor is adequately reinforced. The tray must be fixed with flexible tile adhesive.
Verify the 2% fall is maintained. Ensure the drain outlet is not blocked by debris or improperly installed plumbing. Check that the linear drain grate is clean and correctly seated.
Confirm that flexible tile adhesive was used and applied generously to create a full bond. Check for any gaps or cracks in the tiling or grout around the tray and repair them with appropriate sealant.
Ensure you are not exceeding the 50mm limit from each side. Use a suitable saw or blade for clean cuts. If the required cut is more than 50mm from an edge, this tray may not be suitable for your specific dimensions.
Ensure the cement coating on the tray is clean, dry, and free from dust before tiling. Use a tile adhesive specifically recommended for wet areas and suitable for XPS boards.
Setup:
Compatibility:
Care:
Clean the shower tray surface with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the cement coating or tiles. Ensure the drain area is kept clear of debris to maintain optimal water flow.
