ScotchBlue Masking Tape - 24 mm x 41 m

ScotchBlue™ Multi-Surface Masking Tape is designed for use on a variety of surfaces including painted walls, wood trim, glass, metal, and vinyl.

You can leave the tape on for up to 14 days for residue-free removal.

Yes, ScotchBlue™ Multi-Surface Masking Tape is UV and sunlight resistant, making it suitable for both indoor and outdoor projects.

Store the tape in a cool, dry place away from direct sunlight.

Ensure the surface is clean, dry, and free of dust or oil before applying. Press the tape firmly to ensure a good seal.

While the tape is designed to be gentle, test it on a small, inconspicuous area first if you are unsure about the surface.

The tape is 24 mm wide and 41 meters long.

Remove the tape slowly at a 45-degree angle, ideally within the 14-day window. If the paint is very new, it may be best to wait a day or two after painting, to allow it to fully cure before removing the tape.

Ensure the tape is firmly pressed down, especially along the edges. Apply the tape to a clean, dry surface. If the problem persists, use a different application technique or a tape designed for sharper lines.

Ensure you are removing the tape within the 14-day window. If the tape is old, try using a hairdryer on a low setting to warm the tape before removal to soften the adhesive. Remove slowly at a 45-degree angle.

Make sure you remove the tape within the recommended time frame. For any residue that remains, use a mild adhesive remover or a gentle cleaner to remove it without damaging the surface.